Abstract:An assessment is made of the J-integral test procedure for initial crack growth in an open-cell aluminium alloy foam by combining finite element (FE) simulations with experiment. It is found experimentally that a zone of randomly failed struts develops ahead of the primary crack tip, and is comparable in size to that of the plastic zone. Hence, a crack tip J-field is absent at the initiation of crack growth from the primary crack tip. This implies that the measured J_IC value and the J versus crack extension Da curve cannot be treated as material properties despite the fact that the specimen size meets the usual criteria for J validity. The toughness tests were performed on a single-edge notched bend specimen, and crack extension was measured by the direct current potential drop method, by digital image correlation and by X-ray computed tomography. The crack growth resistance of the foam is associated with two distinct zones of plastic dissipation: (i) a bulk plastic zone emanating from the crack tip (containing a cluster of randomly failed struts), and (ii) a crack bridging zone behind the advancing crack tip. The applicability of a cohesive zone model to predict the fracture response is explored for the observed case of large scale bridging. To do so, FE simulations are performed by replacing the discrete lattice of the open-cell metallic foam by a compressible, elastic-plastic hardening solid while the fracture process zone in the foam is represented by a cohesive zone, as characterised by a tensile traction versus separation law. A detailed comparison of the cohesive zone model with experimental observations reveals that it is possible to capture the load versus displacement response but not the details of the fracture process zone using a single set of process zone parameters.

The Effect of Hole Size Upon the Strength of Metallic and Polymeric Foams

Experimental and Micromechanical Study of Size Effects in the Constrained Deformation of Metallic Foams

Size effects in the constrained deformation of metallic foams

The Mode I Crack Growth Resistance of Metallic Foams

The Effects of Various Adhesives on Multiple Types of Quasi‐Static Mechanical Properties of Rectangular and Square Aluminum Hollow Sections Filled with Composite Metal Foam Cores

Fundamental mechanical relations of open-cell metal foam composite materials with reticular porous structure

Failure Mechanism of Tensile CFRP Composite Plates with Variable Hole Diameter

Effect of the Thickness on the Fracturing Behavior of Discontinuous Fiber Composite Structures

Modeling and Limits of Strength of Nanoporous Foams

Uniaxial Compression Mechanical Properties of Foam Nickel/Iron-Epoxy Interpenetrating Phase Composites

Mode I and II Interlaminar Fracture in Laminated Composites: A Size Effect Study

E!ect of inclusions and holes on the sti!ness and strength of honeycombs

Dynamic Crushing of All-Metallic Corrugated Panels Filled With Close-Celled Aluminum Foams

An experimental and statistical evaluation of flexural performance of single and double notched glass/epoxy composite

An assessment of the J-integral test for a metallic foam

Tensile Behavior of Double-Hole CFRP Composite with Different Holes Position

Experimental evaluation on compression-after-impact behavior of perforated sandwich panel comprised of foam core and glass fiber reinforced epoxy hybrid facesheets

Strengthening of foamed composite materials

Analysis of Buckling Failure Modes of Composite Sandwich Panels Filled with Aluminum Foam

Evaluation on compressive properties of composite laminates with a hole reinforced by metal plate

Modification of nominal strength scaling laws to pseudo-ductility