Abstract:Weights of honeycomb sandwich composite structures are strictly controlled in scenarios such as in contexts of aerospace engineering. However, such structures extensively studied in past investigations were partly or completely made of aluminum or other metallic materials. Sufficient research has not been reported for honeycomb sandwich composites made of lightweight non-metallic materials. This paper presents an investigation into the mechanical responses of the Nomex honeycomb sandwich structure in a three-point bending test. The mathematical relationship between the shear stress distribution in the skin and that in the Nomex honeycomb core under the bending load was deduced. By applying the commercial software ABAQUS/Explicit, numerical simulations were performed with a highly detailed finite element model (micromechanical level) and equivalent elastic parameters. By comparing the experimental and numerical results, the validity of the theoretical derivation was verified. The effects of the thickness of the skin and the direction of the core on the mechanical responses of the honeycomb sandwich structure were studied. The results showed two different failure patterns of the honeycomb sandwich structure in the three-point bending test, which has rarely been reported previously. The improving effect of the increase in the skin thickness on the ultimate bearing capacity was more remarkable when the honeycomb core had a higher shear rigidity. For the same core direction, the honeycomb sandwich structure with the thicker skin had a better crashworthiness. The skin shear force distribution coefficient decreased exponentially with the ratio of core height-to-skin thickness.

E!ect of inclusions and holes on the sti!ness and strength of honeycombs

Influence of structure parameters on mechanical properties of self-similar hierarchical honeycombs

Transverse Shear Modulus and Strength of Honeycomb Cores

Effect of Inclusion Shape on the Effective Elastic Moduli for Composites with Imperfect Interface

Effects of Cell Defects on the Mechanical and Thermal Properties of Carbon Honeycombs

Nonlinear Mechanics of a Thin-Walled Honeycomb with Zero Poisson’s Ratio

Equivalent In-Plane Elastic Moduli of Honeycomb Materials under Hypergravity Conditions

Numerical Modeling of Elastic Modulus and Bucking Load of Honeycombs

The mechanical properties of a transverse isotropic voided material

Research on the Elastoplastic Properties of Auxetic Honeycombs under Tensile Load

Effect of Random Defects on Dynamic Response of Honeycomb Structures

Design 3D improved star-shaped honeycomb with different tip angles from 2D analytical star-shaped model

The role of defects in dictating the strength of brittle honeycombs made by rapid prototyping

Study on Coplanar Mechanical Properties of Metal Honeycomb Sandwich with Typical Defects

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Indentation Resistance of Brittle Auxetic Structures: Combining Discrete Representation and Continuum Model

Mechanical responses of a composite sandwich structure with Nomex honeycomb core

The transverse elastic properties of chiral honeycombs

In-Plane Compressive Responses of Non-Homogenous Re-Entrant Honeycombs Fabricated by Fused Deposition Modelling Manufactured

Novel 2D star-shaped honeycombs with enhanced effective Young’s modulus and negative Poisson’s ratio

Insight into the Negative Poisson's Ratio Effect of Metallic Auxetic Reentrant Honeycomb under Dynamic Compression