Abstract:Abstract.A general method is presented for the rigorous solution of Eshelby’s problem concerned with an arbitrary shaped inclusion embedded within one of two dissimilar elastic half-planes in plane elasticity. The bonding between the half-planes is considered to be imperfect with the assumption that the interface imperfections are uniform.Using analytic continuation, the basic boundary value problem is reduced to a set of two coupled nonhomogeneous first-order differential equations for two analytic functions defined in the lower half-plane which is free of the thermal inclusion. Using diagonalization, the two coupled differential equations are decoupled into two independent nonhomogeneous first-order differential equations for two newly defined analytic functions. The resulting closed-form solutions are given in terms of the constant imperfect interface parameters and the auxiliary function constructed from the conformal mapping which maps the exterior of the inclusion onto the exterior of the unit circle.The method is illustrated using several examples of an imperfect interface. In particular, when the same degree of imperfection is realized in both the normal and tangential directions between the two half-planes, a thermal inclusion of arbitrary shape in the upper half-plane does not cause any mean stress to develop in the lower half-plane. Alternatively, when the imperfect interface parameters are not equal, then a nonzero mean stress will be induced in the lower half-plane by the thermal inclusion of arbitrary shape in the upper half-plane. Detailed results are presented for the mean stress and the interfacial normal and shear stresses caused by a circular and elliptical thermal inclusion, respectively. Results from these calculations reveal that the imperfect bonding condition has a significant effect on the internal stress field induced within the inclusion as well as on the interfacial normal and shear stresses existing between the two half-planes especially when the inclusion is near the imperfect interface.

Reduced Dependence of Defect Compliance on Matrix and Inclusion Elastic Properties in Two-Dimensional Elasticity

Two-dimensional elastic compliances of materials with holes and microcracks

General Solution for Inhomogeneous Line Inclusion with Non-Uniform Eigenstrain

A review of “Consolidation effects on tensile properties of an elemental Al matrix composite” [Mater. Sci. Eng. A386 (2004) 194–204]

Invariance Shifts And Reduced Dependence In Electromagnetic Elastic Fibrous Materials With Defects

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Evaluation of the parallel coupling constitutive model for biomaterials using a fully coupled network-matrix model

Green'S Function and Eshelby'S Fields in Couple-Stress Elasticity

The Overall Response of Composite Materials with Inclusions

Some basic problems in numerically simulating effective properties and local fields of composite materials

Closed-Form Interacting Solutions for Overall Elastic Moduli of Composite Materials with Multi-Phase Inclusions, Holes and Microcracks

A Unified Invariant Description of Micromechanically-Based Effective Elastic Properties for Two-Dimensional Damaged Solids

An explicit and universally applicable estimate for the effective properties of multiphase composites which accounts for inclusion distribution

INSTANTANEOUS THERMAL-EXPANSION BEHAVIOR OF HETEROGENEOUS MATERIALS WITH A WORK-HARDENING ELASTOPLASTIC MATRIX AND ELASTIC SPHEROIDAL INHOMOGENEITIES

Effective elastic properties of a composite containing multiple types of anisotropic ellipsoidal inclusions, with the application to the attachment of tendon to bone

Stable Mixed Finite Elements for Linear Elasticity with Thin Inclusions

Effect of Inclusion Shape on the Effective Elastic Moduli for Composites with Imperfect Interface

Elastic fields in two imperfectly bonded half-planes with a thermal inclusion of arbitrary shape

Standardized Compliance Matrices for General Anisotropic Materials and A Simple Measure of Anisotropy Degree Based on Shear-Extension Coupling Coefficient

Inclusions in a Finite Elastic Body

A Further Exploration of the Interaction Direct Derivative (IDD) Estimate for the Effective Properties of Multiphase Composites Taking into Account Inclusion Distribution