Abstract:In laser powder bed fusion (PBF-LB) additive manufacturing (AM), the laser beam is the fundamental tool used to selectively melt metal powder layer-upon-layer to form a 3-dimensional part. Studies on the effect of the laser scanning parameters (power, speed, hatch distance, and scanning strategy in general) on part quality are abundant; however, far less emphasis has been given to the effect of the laser beam and how it is focused on the laser-material interaction plane. Here, we have studied the effect of laser beam focal point position on porosity and melt pool geometry in PBF-LB AM. In addition, we also study how the various energy density parameters developed for laser melting processes correlate with melt pool dimensions in a situation where the laser beam focal point position (and the beam diameter and laser intensity change at work plane caused by it), is taken into consideration. Furthermore, we assess the possibility of using co-axial, photodiode-based melt pool monitoring signals as a means to monitor the thermal emissions of the process, and how it correlates with the resulting melt pool geometry. It was found that melt pool penetration experiences a major decrease when the focal point position is shifted by more than ±1 mm (or 30% of Rayleigh length), which could be considered as a tolerance limit for acceptable focus shift in PBF-LB machines. Focus shifts larger than this were effectively captured by the photodiode signals, indicating the potential of using such photodiode-based melt pool monitoring systems for continuous monitoring of focus shift in PBF-LB AM. Finally, it was shown that all the studied energy density parameters, except volumetric energy density, were able to capture the trend in normalized melt pool dimensions when focus position is introduced as a variable. A new energy density metric by normalizing the melt pool monitoring signal intensity with the beam area was introduced and shown to correlate with the normalized melt pool dimensions.

Development of a novel powder sheets printing process towards the next generation of additive manufacturing: the role of laser defocusing

Powder sheet additive manufacturing of multi-material structures: Experimental and computational characterizations

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Experimental and numerical exploration of defocusing in Laser Powder Bed Fusion (LPBF) as an effective processing parameter

Area melting with multi-laser arrays to increase build rate for metal powder bed fusion additive manufacturing

Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing

Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter and denudation zones

Laser powder bed fusion of 316L stainless steel and K220 copper multi-material

Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing

The interplay of local chemistry and plasticity in controlling microstructure formation during laser powder bed fusion of metals

Defects and anomalies in powder bed fusion metal additive manufacturing

In-situ High-Speed X-ray Imaging of Piezo-Driven Directed Energy Deposition Additive Manufacturing

The interplay between vapour, liquid, and solid phases in laser powder bed fusion

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

Effect of laser focal point position on porosity and melt pool geometry in laser powder bed fusion additive manufacturing

Revealing formation mechanism of end of process depression in laser powder bed fusion by multi-physics meso-scale simulation

Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction