Abstract:Optical measuring devices are widely used in industrial production and maintenance processes. With increasing integration, the accessibility of functional elements inside machines is limited for measuring devices. In order to provide a new measurement tool for these applications, the design of an endoscopic 3D sensor based on the structured light principle is presented. Application specific sensor heads are introduced, with diameters down to 8 mm attached to endoscopes with a length of 1 m. The sensor features a flexible pattern generator and a camera, allowing for dynamic reconfiguration of structured illumination patterns. Based on a brief comparison of existing light coding approaches, two different measuring modes for the sensor are described. The first measuring mode uses conventional phase-shift sequences in order to achieve highly accurate measurements under controlled conditions. The second measuring mode uses a new interleaved encoding approach for phase-shift patterns, which enables robust measurements even in the presence of relative motion between object and sensor. An example for this type of motion is the movement of the endoscope tip by hand. Using the proposed sequence design, the 3D acquisition rate is identical to the capture rate of the camera, which amounts to a maximum of 180 Hz in the current hardware configuration of the measuring endoscope. In combination with a registration and merging algorithm, consecutive measurements are automatically combined, enabling the measurement of large surfaces. Moreover, the approach is capable of estimating the relative location and orientation of the endoscope tip using odometry based on depth data. The performance of the sensor in both measuring modes is evaluated on the basis of measurements of reference objects. Furthermore, the results of a hand-held measurement of a reference standard are shown.

Camera system of oral cavity endoscope

Design of High Resolution Panoramic Endoscope Imaging System Based on Freeform Surface

Linkage Couples Based Endoscope-holder Robot with Enhanced Bending Curvature for Laparoscopic Surgery

Design and Realization of Oral Cavity Endoscope System

A Novel Endoscope Design Using Spiral Technique for Robotic-Assisted Endoscopy Insertion

A dual‐bending endoscope with shape‐lockable hydraulic actuation and water‐jet propulsion for gastrointestinal tract screening

Endotracheal intubation lens

Endoscope lens cleaning device

High Resolution Miniaturized CMOS Camera Module for Medical Electronic Endoscope

Highly flexible and compact volumetric endoscope by integrating multiple micro-imaging devices

A 3D measuring endoscope for hand-guided operation

Portable Electronic Endoscopic Imaging System

Development of a Micro Intelligent Surgery Lighting Camera

A new globularity capsule endoscopy system with multi-camera

An Earthworm-Like Robotic Endoscope System for Human Intestine: Design, Analysis, and Experiment

Real Time Focusing and Directional Light Projection Method for Medical Endoscope Video

A novel miniature robotic endoscope design for intestinal inspection]

An Endoscope Manipulating Robot Design

Optical Design of Rigid Endoscope with 30° Viewing Angle

Confocal Endoscopic Optical Imaging System

Design and Simulation of Scanner Wrapped by Flexible Microcoil Embedded in Polymer Film for Single-Optical Endoscope Application