Abstract:Soft pneumatic actuators have been explored for endoscopic applications, but challenges in fabricating complex geometry with desirable dimensions and compliance remain. The addition of an endoscopic camera or tool channel is generally not possible without significant change in the diameter of the actuator. Radial expansion and ballooning of actuator walls during bending is undesirable for endoscopic applications. The inclusion of strain limiting methods like, wound fibre, mesh, or multi-material molding have been explored, but the integration of these design approaches with endoscopic requirements drastically increases fabrication complexity, precluding reliable translation into functional endoscopes. For the first time in soft robotics, we present a multi-channel, single material elastomeric actuator with a fully corrugated design (inspired by origami); offering specific functionality for endoscopic applications. The features introduced in this design include i) fabrication of multi-channel monolithic structure of 8.5 mm diameter, ii) incorporation of the benefits of corrugated design in a single material (i.e., limited radial expansion and improved bending efficiency), iii) design scalability (length and diameter), and iv) incorporation of a central hollow channel for the inclusion of an endoscopic camera. Two variants of the actuator are fabricated which have different corrugated or origami length, i.e., 30 mm and 40 mm respectively). Each of the three actuator channels is evaluated under varying volumetric (0.5 mls-1 and 1.5 mls-1 feed rate) and pressurized control to achieve a similar bending profile with the maximum bending angle of 150°. With the intended use for single use upper gastrointestinal endoscopic application, it is desirable to have linear relationships between actuation and angular position in soft pneumatic actuators with high bending response at low pressures; this is where the origami actuator offers contribution. The soft pneumatic actuator has been demonstrated to achieve a maximum bending angle of 200° when integrated with manually driven endoscope. The simple 3-step fabrication technique produces a complex origami pattern in a soft robotic structure, which promotes low pressure bending through the opening of the corrugation while retaining a small diameter and a central lumen, required for successful endoscope integration.

A dual‐bending endoscope with shape‐lockable hydraulic actuation and water‐jet propulsion for gastrointestinal tract screening

Linkage Couples Based Endoscope-holder Robot with Enhanced Bending Curvature for Laparoscopic Surgery

Design and Stiffness Control of a Variable-Length Continuum Robot for Endoscopic Surgery

Dual-Continuum Design Approach for Intuitive and Low-Cost Upper Gastrointestinal Endoscopy

A Novel Endoscope Design Using Spiral Technique for Robotic-Assisted Endoscopy Insertion

A Balloon Endomicroscopy Scanning Device for Diagnosing Barrett's Oesophagus.

Adaptable, shape-conforming robotic endoscope

A Novel Miniature Flexible Instrument with Unfolding and Decoupling Design for Endoscopic Surgery

A Novel Distal Hybrid Pneumatic/Cable‐Driven Continuum Joint with Variable Stiffness Capacity for Flexible Gastrointestinal Endoscopy

Chip-on-tip endoscope incorporating a soft robotic pneumatic bending microactuator

Global and Local Panoramic Views for Gastroscopy: an Assisted Method of Gastroscopic Lesion Surveillance.

A Novel Asymmetric Pneumatic Soft-Surgical Endoscope Design with Laminar Jamming

A Soft Pneumatic Two-Degree-of-Freedom Actuator for Endoscopy

Highly flexible and compact volumetric endoscope by integrating multiple micro-imaging devices

Development of a Mechanical Scanning Device with High-Frequency Ultrasound Transducer for Ultrasonic Capsule Endoscopy.

An Origami-Based Soft Robotic Actuator for Upper Gastrointestinal Endoscopic Applications

Steerable catheter based on wire-driven seamless artificial blood vessel tube for endoscopic retrograde transpapillary interventions

A generic scope actuation system for flexible endoscopes

Design, simulation and experimental analysis of a monolithic bending section for enhanced maneuverability of single use laparoscopic devices

Design, Analysis, and Kinematic Framework of a Long-Range Magnetic Anchored and Guided Endoscope

Motion-Guided Dual-Camera Tracker for Endoscope Tracking and Motion Analysis in a Mechanical Gastric Simulator