Abstract:Background: Difficulties in establishing diagnosis of small bowel (SB) disorders, prevented their effective treatment. This problem was largely resolved by wireless capsule endoscopy (WCE), which has since become the first line investigation for suspected SB disorders. Several types of WCE pills are now used in clinical practice, despite their limitations and complications. WCE pills are large, rigid and immotile capsules. When swallowed, they provide SB enteroscopy downloaded to a data logger carried by the patient. Most of the complications of WCEs result from lack of intrinsic locomotion: incomplete examination, capsule retention and impaction within strictures. In addition, the rigid nature and size of current generation of WCE pills is accompanied by 0.1% inability to swallow the pill by patients with normal esophageal motility. Methods: The aim of this communication is to describe the initial prototype, P1, which is thinner and slightly longer than the current generation of WCEs. In addition, it exhibits intrinsic active locomotion, produced by vibrating silicon legs. These generate a controlled-skid locomotion on the small bowel mucosal surface, rendered slippery by surface mucus and intraluminal surfactant bile salts. We demonstrate the mechanism responsible for the active locomotion of P1, which we consider translatable into a working prototype, suitable for further R&D for eventual clinical translation. Results: The shape and attachment of the rubber vibrating legs to vibrating actuators, have been designed specifically to produce a tight clockwise circular motion. When inserted inside a circular tube in vitro of equivalent diameter to human small intestine, the intrinsic circular clockwise motion of P1 translates into a linear locomotion by the constraints imposed by the surrounding circular walls of SB and rest of the gastrointestinal tract. This design ensures device stability during transit, essential for imaging and targeting lesions encountered during the enteroscopy. We preformed two experiments: (i) transit of P1 through a phantom consisting of a segment of PVC tube placed on a horizontal surface and (ii) transit through a transparent slippery nylon sleeve insufflated with air. In the PVC tube, its transit rate averages 15.6 mm/s, which is too fast for endoscopy: whereas inside the very slippery nylon sleeve insufflated with air, the average transit rate of P1 is reduced to 5.9 mm/s, i.e., ideal for inspection endoscopy. Conclusions: These in-vitro experiments indicate that the P1 hybrid soft robot prototype has the potential specifically for clinical translation for SB enteroscopy.

An Earthworm-Like Robotic Endoscope System for Human Intestine: Design, Analysis, and Experiment

A Wireless Robotic Endoscope for Gastrointestine

Micro-intestinal robot with wireless power transmission: design, analysis and experiment

Development of a micro‐robot for endoscopes based on wireless power transfer

A wirelessly powered expanding-extending robotic capsule endoscope for human intestine

An active endoscopic robot based on wireless power transmission and electromagnetic localization

A wireless capsule robot with spiral legs for human intestine

Linkage Couples Based Endoscope-holder Robot with Enhanced Bending Curvature for Laparoscopic Surgery

Preliminary study of an intestinal bio-robot system based on nerve stimulation

Design, Fabrication And Performances Of A Biomimetic Robotic Earthworm

A micro creeping robot for colonoscopy based on the earthworm

Preliminary Study on a Three-coil Wireless Power Transfer System for Endoscope Micro-robot of Intestinal Diagnosis: Design, Optimization and Validation

Wireless technologies for robotic endoscope in gastrointestinal tract

The Modelling, Analysis, and Experimental Validation of a Novel Micro-Robot for Diagnosis of Intestinal Diseases

Micro robot prototype for colonoscopy and in vitro experiments

A Novel Inchworm-Inspired Soft Robotic Colonoscope Based on a Rubber Bellows

Design of micro biopsy device for wireless autonomous endoscope

Soft hybrid intrinsically motile robot for wireless small bowel enteroscopy

Modeling and Experimental Validation of the Locomotion of Endoscopic Robots in the Colon

Design and implementation of a novel wireless modular capsule robotic system in pipe

Adaptable, shape-conforming robotic endoscope