Influence of single chain nanoparticle stabilizers on polymerization induced hierarchical self-assembly

Wei Wen,Aihua Chen

DOI: https://doi.org/10.1039/d1py00145k

IF: 4.6

2021-01-01

Polymer Chemistry

Abstract:Intramolecularly folded single chain nanoparticles (SCNPs) with steric character are used as stabilizers to construct a polymerization-induced self-assembly (PISA) formulation for the first time.

polymer science

What problem does this paper attempt to address?

Inverse Bicontinuous Structure by Polymerization-Induced Self-Assembly Against Single-Chain Nanoparticles

Wei Wen,Song Guan,Zhenzhong Yang,Aihua Chen

DOI: https://doi.org/10.1021/acsmacrolett.1c00156

IF: 5.8

2021-04-28

ACS Macro Letters

Abstract:Polymer particles with inverse bicontinuous structures have attracted considerable attention due to their diverse applications. The conventional generation requires controlling numerous key parameters under strict conditions, such as solvent property, polymer composition, and architecture. In order to improve the preparation efficiency within a broad window, we employed a method by polymerization-induced self-assembly (PISA) against intramolecularly folded single-chain nanoparticles (SCNPs). The SCNPs bear an active site for further polymerization. The SCNPs with smaller sizes facilitate easier controlling of the packing parameter above unity to meet the requirement of the unique structures. The concept is demonstrated by forming the inverse bicontinuous structure through PISA in ethanol against two SCNPs of P4VP(SCNPx%)35-CTA and P(PEGMA20-co-TMSPMA4)(SCNP16.7%)-CTA. The unique structure is easily achieved when growing a relatively shorter polymer chain within a broad window. The work paves the avenue to prepare polymer particles with the unique structure in large scale, and other functional materials are expected by using the functional SCNPs or favorable growth of desired materials within the particles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsmacrolett.1c00156?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsmacrolett.1c00156</a>.Experimental section and supporting figures and table (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00156/suppl_file/mz1c00156_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

polymer science
Exploration of a Living Anionic Polymerization Mechanism into Polymerization-Induced Self-Assembly and Site-Specific Stabilization of the Formed Nano-Objects

Jian Wang,Mengya Cao,Peng Zhou,Guowei Wang

DOI: https://doi.org/10.1021/acs.macromol.0c00371

IF: 5.5

2020-01-01

Macromolecules

Abstract:The polymerization-induced self-assembly (PISA) has been developed with great success and rapidly promoted the application of the self-assembly technique in practice. The living anionic polymerizat...
Self-Assembly of Single-Chain Nanoparticles from Block Copolymers into Inverse Bicontinuous Structures

Yalan Sun,Zichao Deng,Aihua Chen

DOI: https://doi.org/10.1039/d3py01377d

IF: 4.6

2024-01-21

Polymer Chemistry

Abstract:Polymer particles with inverse bicontinuous structures are widely used due to their well-defined ordered pore networks. These structures are typically prepared by traditional self-assembly of amphiphilic block copolymers (BCPs) in solution or polymerization-induced self-assembly (PISA). In both methods, BCPs must be highly asymmetric with long hydrophobic chains. In this study, we report a credible approach where single-chain nanoparticles (SCNPs) preferentially self-assemble into inverse bicontinuous structures by folding the hydrophilic chains of BCPs, which can reduce the molecular area a 0 and thus increase the packing parameter ( P ) greater than unity. It is anticipated that this strategy will lessen the rigorous requirement of inverse bicontinuous structures on the BCP asymmetry. To illustrate this strategy, we prepared tadpole-like SCNPs of poly(4-vinylpyridine)- block -polystyrene (P4VP- b -PS) by intrachain cross-linking the P4VP blocks. Polymer cubosomes could be self-assembled from both linear BCPs and tadpole-like SCNPs, resulting in a distinct reduction in the minimal volume fractions of PS ( f PS ) (94.4% and 91.1%, respectively). A plausible formation mechanism of cubosome was proposed. In addition, the efficiency of intrachain cross-linking and the property of the co-solvent played crucial roles in the formation of cubosomes. Overall, this work provides an effective method for preparing polymer particles with inverse bicontinuous structures from relatively low-asymmetric BCPs with a broad window.

polymer science
In Situ Synthesis of PAA-b-PSt Nano-Assemblies Via Dispersion RAFT Polymerization: Effects of PEG in the Medium

Yong Wu,Mengting Tan,Zhipeng Su,Yan Shi,Zhifeng Fu,Wantai Yang

DOI: https://doi.org/10.1039/c8nj04644a

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:A facile and efficient approach was developed to manipulate BCP assemblies in PISA by introduction of PEG in the medium. Both the amount and the molecular weight of PEG have significant effects on PAA-b-PSt micelles. More importantly, vesicles with more uniform size can be easily prepared and tuned via the addition of PEG.
Polymerization-induced Self-Assembly for the Fabrication of Polymeric Nano-Objects with Enhanced Structural Stability by Cross-Linking

Wen‐Jian Zhang,Jamshid Kadirkhanov,Changhui Wang,Shenggang Ding,Chun‐Yan Hong,Fei Wang,Ye‐Zi You

DOI: https://doi.org/10.1039/d0py00368a

IF: 4.6

2020-01-01

Polymer Chemistry

Abstract:This review discusses the strategies of core-cross-linking in most of the PISA literatures (including post-polymerization cross-linking, photo-cross-linking and in situ cross-linking) and the applications of the cross-linked nano-objects.
Polymerization Techniques in Polymerization-Induced Self-Assembly (PISA)

Chao Liu,Chun‐Yan Hong,Chen Pan

DOI: https://doi.org/10.1039/d0py00455c

IF: 4.6

2020-01-01

Polymer Chemistry

Abstract:The development of controlled/“living” polymerization greatly stimulated the prosperity of the fabrication and application of block copolymer nano-objects.
Sequence Structure Controllable Polymerization-Induced Self-Assembly

Zi-Xuan Chang,Ren-Man Zhu,Chun-Yan Hong,Wen-Jian Zhang

DOI: https://doi.org/10.1007/s11426-023-1770-7

2023-01-01

Science China Chemistry

Abstract:Polymerization-induced self-assembly (PISA) combines synthesis and self-assembly of artificial polymers in one-pot, which brings us one step closer to emulating biosynthesis. However, the reported PISA formulations primarily focus on developing nano-objects with new chemical compositions and rarely on structural regulation of polymers with specific components. Herein, sequence structure controllable polymerization-induced self-assembly (SCPISA) is reported by using 7-(2-methacryloyloxyethoxy)-4-methylcoumarin (CMA) as a monomer. During the copolymerization of 2-hydroxyethyl methacrylate (HEMA) and CMA, controlled incorporation of CMA units into the polymer chains can be realized by programmable light/heat changes. SCPISA-based P(HEMA- co -CMA) copolymers with the same composition but different sequence structures generate a range of assemblies. Moreover, the morphologies of the resultant nano-objects can also be controlled by regulating the feed molar ratio of CMA and HEMA, which is similar to the conventional PISA, but the synthesis procedure is obviously simplified in SCPISA. The versatility of the methodology is further demonstrated by the fabrication of different functional nano-objects with sequence structure-dependent morphologies in SCPISA systems with different functional monomers.
Chirality-controlled polymerization-induced self-assembly

Haolan Li,Erik Jan Cornel,Zhen Fan,Jianzhong Du

DOI: https://doi.org/10.1039/d2sc05695j

2022-11-17

Abstract:Recent studies have shown that biodegradable nanoparticles can be efficiently prepared with polymerization of N-carboxyanhydrides-induced self-assembly (NCA-PISA). However, thus far, the effect of chiral monomer ratio on such NCA-PISA formulations and the resulting nanoparticles has not yet been fully explored. Herein, we show, for the first time, that the morphology, secondary structure, and biodegradation rate of PISA nanoparticles can be controlled by altering the chiral ratio of the core-forming monomers. This chirality-controlled PISA (CC-PISA) method allowed the preparation of nanoparticles that are more adjustable and applicable for future biomedical applications. Additionally, the complex secondary peptide structure (ratio of α-helix to β-sheet) and π-π stacking affect the polymer self-assembly process. More specifically, a PEG45 macro-initiator was chain-extended with l- and d-phenylalanine (l- and d-Phe-NCA) in various molar ratios in dry THF at 15 wt%. This ring-opening polymerization (ROP) allowed the preparation of homo- and hetero-chiral Phe-peptide block copolymers that self-assembled in situ into nanoparticles. For homo-chiral formulations, polymers self-assembled into vesicles once a sufficiently high phenylalanine degree of polymerization (DP) was obtained. Hetero-chiral formulations formed larger nanoparticles with various morphologies and, much to our surprise, using an equal enantiomer ratio inhibited PISA and led to a polymer solution instead. Finally, it was shown that the enzymatic biodegradation rate of such PISA particles is greatly affected by the polymer chirality. This PISA approach could be of great value to fabricate nanoparticles that exploit chirality in disease treatment.
In situ synthesis of PAA-b-PSt nano-assemblies via dispersion RAFT polymerization: effects of PEG in the medium

Yong Wu,Mengting Tan,Zhipeng Su,Yan Shi,Zhifeng Fu,Wantai Yang

DOI: https://doi.org/10.1039/c8nj04644a

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:A facile and efficient approach was proposed to adjust BCP assemblies in PISA by introduction of PEG in the medium. Both PEG amount and molecular weight have significant effects on PAA-b-PSt micelles.
Polymerization-Induced Interfacial Self-Assembly of Janus Nanoparticles in Block Copolymers: Reaction-Mediated Entropy Effects, Diffusion Dynamics, and Tailorable Micromechanical Behaviors

Pengyu Chen,Ye Yang,Bojun Dong,Zihan Huang,Guolong Zhu,Yufei Cao,Li-Tang Yan

DOI: https://doi.org/10.1021/acs.macromol.7b00012

IF: 5.5

2017-01-01

Macromolecules

Abstract:Polymerization-induced self-assembly (PISA) has become widely recognized as a robust and efficient route to produce nanostructured systems toward functionally superior materials. Herein, by combining mesoscale simulations and micromechanical modeling, we report the structural control over the interfacial organization and the resulted micro mechanical behaviors of novel nanocomposites designed based on the PISA of initiator-modified Janus nanoparticles in diblock copolymers. Our simulations demonstrate that the off center distribution of these functionalized Janus nanoparticles with respect to phase interface can be precisely regulated by tuning the reaction kinetics and the concentration of monomers dispersed in polymer microdomains. Theoretical calculation reveals that such polymerization-induced interfacial self assembly of Janus nanoparticles is fundamentally attributed to a unique entropy effect mediated by the reaction. The diffusion dynamics of monomers in the entanglement mesh of the diblock copolymers is also examined to evaluate the efficiency of the structural control governed by polymerization in the polymer matrix. Furthermore, the combination of techniques allows us to determine how the interfacial polymerization of Janus nanoparticles influences the micromechanical behaviors, such as the elastic fields, modulus, and failure, fracture behaviors of the nanocomposites. The findings have a bearing on enriching our understanding on the thermodynamic nature of polymer nanocomposites and suggest design guidelines for creating block copolymer-based functional materials of programmable interfacial nanostructures correlated with controlled mechanical performance.
Customizable Nano-Sized Colloidal Tetrahedra by Polymerization-Induced Particle Self-Assembly (PIPA)

Dan Li,Nan Liu,Min Zeng,Jinzhao Ji,Xi Chen,Jinying Yuan

DOI: https://doi.org/10.1039/d2py00407k

IF: 4.6

2022-01-01

Polymer Chemistry

Abstract:Nanoscale colloidal tetrahedra are synthesized by polymerization-induced particle self-assembly, with high purity, which allows the 3D reconstruction by single particle electron microscopy analysis.
Directed Nanoparticle Assembly via Polymer Crystallization.

Mark C. Staub,Shan Mei,Christopher Y. Li

DOI: https://doi.org/10.1002/chem.201903022

2019-10-15

Chemistry

Abstract:Nanoparticles can be assembled into complex structures and architectures using a variety of methods. In this review, we discuss recent progress of using polymer crystallization (particularly polymer single crystals, PSCs) to direct nanoparticle assembly. PSCs have been extensively studied since 1957. Mainly appearing as quasi-two-dimensional (2D) lamellae, PSCs are typically used as model systems to determine polymer crystalline structures, or as markers to investigate the crystallization process. Recent research has demonstrated that they can also be used as nanoscale functional materials. Herein, we show that nanoparticles can be directed to assemble into complex shapes using in-situ or ex-situ polymer crystal growth. End-functionalized polymers can crystallize into 2D nanosheet PSCs, which are used to conjugate with complementary nanoparticles, leading to a nanosandwich structure. These nanosandwiches can find interesting applications for catalysis, surface enhanced Raman spectroscopy, and nanomotors. Dissolution of the nanosandwich leads to the formation of Janus nanoparticles, providing a unique method for asymmetric nanoparticle synthesis.

Chemistry,Medicine,Materials Science
Polymerization-Induced Self-Assembly of ABC Triblock Copolymer

Feng Huang,Pengxiang Xu,Yisheng Lu,Shaoliang Lin

DOI: https://doi.org/10.6023/cjoc201605023

2016-01-01

Abstract:Polymerization-induced self-assembly (PISA) is a new robust strategy to produce concentrated dispersions of block copolymer nano-objects. Insight into the dynamic process can promote the development of PISA by computer simulations. In this work, dissipative particle dynamics simulations (DPD) with a reaction model were employed to investigate the PISA behavior of ABC triblock copolymer. The polymerization of solvophobic B block was firstly performed using solvophilic macromolecular initiator A to fabricate AB copolymer. The continuous morphology transition from spherical micelle to wormlike micelle, to lamellae and finally to vesicle was observed during the process. Then, the polymerization of C block was further carried out and induced the different ABC triblock copolymer aggregates by tuning the interaction between C block and solvent (solvophobic or solvophilic).
Colloidal crystals of monodisperse fluoro-nanoparticles by aqueous polymerization-induced self-assembly.

Nankai An,Xi Chen,Mingxin Zheng,Jinying Yuan

DOI: https://doi.org/10.1039/d3cc01019h

2023-01-01

Abstract:Here, we prepared monodisperse fluorinated nanospheres with the diameter regulated from 100 to 200 nm and PDI of the diameter lower than 0.05 polymerization-induced self-assembly (PISA). Mono/multilayered 2D and large-scale ordered 3D lattices were formed by solvent evaporation-induced colloidal self-assembly. This work shows the promising application of PISA in colloidal self-assembly.
A novel approach to polymeric hollow nanospheres with stabilized structure.

Min Kuang,Hongwei Duan,Jing Wang,Daoyong Chen,Ming Jiang

2003-01-01

Abstract:Polymeric hollow nanospheres with stabilized structure have been realized by self-assembly of crosslinkable rigid poly(amic acid) ester (PAE) oligomer and coil-like poly(4-vinylpyridine) (PVPy) via hydrogen bonding in their common solvent and subsequent photo-crosslinking of the PAE.
Development of ICAR ATRP-Based Polymerization-Induced Self-Assembly and Its Application in the Preparation of Organic-Inorganic Nanoparticles

Boyang Shi,Hao Zhang,Yi Liu,Jian Wang,Peng Zhou,Mengya Cao,Guowei Wang

DOI: https://doi.org/10.1002/marc.201900547

IF: 5.006

2019-01-01

Macromolecular Rapid Communications

Abstract:The functionalization and application of nano-objects generated using a polymerization induced self-assembly (PISA) procedure is becoming a focus in recent years. In this contribution, using ethanol as solvent, poly(oligo(ethylene oxide) methyl ether methacrylate) (POEOMA) as macro-initiator/stabilizer, and 2-(perfluorohexyl)ethyl methacrylate (PFHEMA) and glycidyl methacrylate (GMA) as comonomers, the initiators for continuous activator regeneration atom transfer radical polymerization (ICAR ATRP)-based PISA is realized. The lower GMA content system tends to form spheres with large diameters and heavy contrast, while the lower PFHEMA content system tends to form the spheres or short worms with small diameters. However, the system with further increased GMA content results in the failed ICAR ATRP PISA procedure with the formation of precipitates by the cross-linking reaction between pendant epoxy groups. Furthermore, using the efficient reaction between the epoxy group on GMA and thiol group on mercapto-succinic acid agent, the carboxyl groups can be introduced into the inner cavity of the nano-objects and used for incorporation with the Fe2+ and Fe3+ ions, and the organic-inorganic nanoparticles Fe3O4@POEOMA are finally prepared in the presence of a reductant.
Polymerization-Induced Self-Assembly of Functionalized Block Copolymer Nanoparticles and Their Application in Drug Delivery

Wen-Jian Zhang,Chun-Yan Hong,Cai-Yuan Pan

DOI: https://doi.org/10.1002/marc.201800279

IF: 5.006

2019-01-01

Macromolecular Rapid Communications

Abstract:Drug delivery systems (DDS) based on functionalized polymeric nanoparticles have attracted considerable attention. Although great advances have been reported in the past decades, the fabrication efficiency and reproducibility of polymeric nanoparticles are barely satisfactory due to the intrinsic limitations of the traditional self-assembly method, which severely prevent further applications of the intelligent DDS. In the last decade, a new self-assembly method, which is usually called polymerization-induced self-assembly (PISA), has become a powerful strategy for the fabrication of the polymeric nanoparticles with bespoke morphology. The PISA strategy efficiently simplifies the fabrication of polymeric nanoparticles (combination of the polymerization and self-assembly in one pot) and allows the fabrication of polymeric nanoparticles at a relatively high concentration (up to 50 wt%), making it realistic for large-scale production of polymeric nanoparticles. In this review, the developments of PISA-based polymeric nanoparticles for drug delivery are discussed.
Exploring the Topological Effect of Linear and Cyclic Macroctas During Polymerization-Induced Self-Assembly (PISA)

Depeng Yin,Wen Xu,Hualong Zhang,Chao Liu,Chunyan Hong

DOI: https://doi.org/10.52396/justc-2022-0040

2022-01-01

Abstract:Polymerization-induced self-assembly (PISA) is a robust strategy for the syntheses of block copolymer nano-objects with various morphologies. Although PISA has been extensively studied, the use of cyclic macromolecular chain transfer agents (macroCTAs) as the hydrophilic block has not been reported. We explored the effects of macroCTA topo-logy on the polymerization kinetics and morphologies of block copolymer assemblies during reversible addition-fragment-ation chain transfer (RAFT) dispersion polymerization. To this end, linear and cyclic poly (ethylene oxide) (PEO) with 4-(4-cyanopentanoic acid) dithiobenzoate (CPADB) groups were synthesized and used as CTAs to mediate the RAFT poly-merization of benzyl methacrylate (BzMA) and 2,3,4,5,6-pentafluorostyrene (PFSt) under PISA formulation. Interestingly, the nucleation period of the linear PEO is slightly shorter than that of its cyclic analog, and the cyclic hydrophilic segment leads to a delayed morphological transition during PISA.
A polymerization-induced self-assembly process for all-styrenic nano-objects using the living anionic polymerization mechanism

Chengcheng Zhou,Jian Wang,Peng Zhou,Guowei Wang

DOI: https://doi.org/10.1039/d0py00296h

IF: 4.6

2020-01-01

Polymer Chemistry

Abstract:We report the combination of the living anionic polymerization (LAP) mechanism with the polymerization-induced self-assembly (PISA) process, and the all-styrenic diblock copolymer poly(p-tert-butylstyrene)-b-polystyrene (PtBS-b-PS) based LAP PISA. Firstly, the practicability and controllability of the LAP PISA were successfully confirmed by the well-controlled molecular weight (MW) and narrow molecular weight distribution (M-w/M-n < 1.10). Subsequently, the effect of key factors, including the MWs of PtBS and PS segments, targeted MW ratio M-n,M-PS/M-n,M-PtBS, and weight solids content, on the morphological evolution was investigated, and the phase diagram was finally presented.
Kinetics and morphologies in polymerization‐induced cooperative assembly: a computer simulation investigation

Hui Lu,Wen‐Yuan Song,Ying‐Yi Zou,Wei‐Shao Xu,Yu‐Dou Yan,Hong Liu,Li‐Jun Ma

DOI: https://doi.org/10.1002/pi.6269

IF: 3.213

2021-07-08

Polymer International

Abstract:In the recent decade, PISA (polymerization-induced self-assembly) has emerged to be a quite popular technique for preparing a variety of nanoassembly structures in the selective solvent. As a special technique of PISA, PICA (polymerization-induced cooperative assembly) is believed to be able to produce more variable nanostructures and its regulation ways seem even flexible. The process of PICA is studied systematically with the simulation method for discovering possible regulation ways of the morphologies. We find that the existence of solvophobic homopolymers yields a "chain growth retarding effect", which effectively slows down the reaction kinetics of the polymerization. Besides of proving the transition from lower-order morphologies to higher-order morphologies as reported in experiments, we also find the novel transition from higher-order morphologies to lower-order morphologies, as a result of the self-adaptation behavior of the system. For the first time, we demonstrate that this behavior is able to be well described as a kind of inverse flip-flop process of vesicle structures to the thermodynamically stable micelle structure. We also discover that the obvious contrast of length between the solvophilic macro-chain transfer agents and solvophobic blocks is beneficial to the emergence of plentiful kinds of structures. This study is helpful for understanding the crucial factors on precisely regulating the morphologies in PICA, as well as guiding the way to improve the experimental technologies.This article is protected by copyright. All rights reserved.

polymer science

Influence of single chain nanoparticle stabilizers on polymerization induced hierarchical self-assembly

Inverse Bicontinuous Structure by Polymerization-Induced Self-Assembly Against Single-Chain Nanoparticles

Exploration of a Living Anionic Polymerization Mechanism into Polymerization-Induced Self-Assembly and Site-Specific Stabilization of the Formed Nano-Objects

Self-Assembly of Single-Chain Nanoparticles from Block Copolymers into Inverse Bicontinuous Structures

In Situ Synthesis of PAA-b-PSt Nano-Assemblies Via Dispersion RAFT Polymerization: Effects of PEG in the Medium

Polymerization-induced Self-Assembly for the Fabrication of Polymeric Nano-Objects with Enhanced Structural Stability by Cross-Linking

Polymerization Techniques in Polymerization-Induced Self-Assembly (PISA)

Sequence Structure Controllable Polymerization-Induced Self-Assembly

Chirality-controlled polymerization-induced self-assembly

<i>In situ</i> synthesis of PAA-<i>b</i>-PSt nano-assemblies <i>via</i> dispersion RAFT polymerization: effects of PEG in the medium

Polymerization-Induced Interfacial Self-Assembly of Janus Nanoparticles in Block Copolymers: Reaction-Mediated Entropy Effects, Diffusion Dynamics, and Tailorable Micromechanical Behaviors

Customizable Nano-Sized Colloidal Tetrahedra by Polymerization-Induced Particle Self-Assembly (PIPA)

Directed Nanoparticle Assembly via Polymer Crystallization.

Polymerization-Induced Self-Assembly of ABC Triblock Copolymer

Colloidal crystals of monodisperse fluoro-nanoparticles by aqueous polymerization-induced self-assembly.

A novel approach to polymeric hollow nanospheres with stabilized structure.

Development of ICAR ATRP-Based Polymerization-Induced Self-Assembly and Its Application in the Preparation of Organic-Inorganic Nanoparticles

Polymerization-Induced Self-Assembly of Functionalized Block Copolymer Nanoparticles and Their Application in Drug Delivery

Exploring the Topological Effect of Linear and Cyclic Macroctas During Polymerization-Induced Self-Assembly (PISA)

A polymerization-induced self-assembly process for all-styrenic nano-objects using the living anionic polymerization mechanism

Kinetics and morphologies in polymerization‐induced cooperative assembly: a computer simulation investigation