Abstract:PURPOSE:Using sandblast, double acid-etching and H(2)O(2)/HCl solution treatment to establish a new implant surface, and to analyze the surface's morphology.METHODS:After being polished, sandblasted, cleaned, the titanium specimens were divided into six groups, i.e.A to F group. The specimens of group A were treated with low concentration of HF/HNO(3) solution, Group B was treated with low concentration of HF/HNO(3) solution and then H(2)SO(4)/HCl solution, Group C was treated after Group B and further with H(2)O(2)/HCl solution at 80degrees centigrade for 30 minutes, and subsequently heated at 400degrees centigrade for 1 hour. Group D was treated with high concentration of HF/HNO(3) solution, Group E was treated after Group D and then H(2)SO(4)/HCl solution, Group F was treated after E group and further with H(2)O(2)/HCl solution at 80degrees centigrade for 30 minutes, and subsequenty heated at 400degrees centigrade for 1 hour.RESULTS:The titanium surface sandblasted and ultrasonically cleaned exhibited a great deal of particles. The titanium plates treated with low concentration of HF/HNO(3) solution still had some particles, but there were much nano-holes on the titanium surface. The titanium plates treated with high concentration of HF/HNO(3) solution had no particles on the surface, but showed much micron-holes on the titanium surface. The titanium plates treated with H(2)SO(4)/HCl solution after HF/HNO(3) solution etching had all particles removed and got multilevel holes on the surface.The last H(2)O(2)/HCl method produced an anatase titania gel layer on the specimen surface.CONCLUSION:By altering the concentration of HF/HNO(3) solution, we could make different sizes of apertures on the titanium surface. Double acid-etching can remove all sandblasting particles embedded in titanium surfaces and form multilevel holes. The H(2)O(2)/HCl method can turn the rough non- crystallographic TiO(2) layer into the anatase titania gel layer.

Purity Level of Titanium, Zirconium, and Hafnium (according to Materials in the Exhibition–Collection of Extrapure Substances)

Purity Level of Rare-Earth Metals (according to Materials in the Exhibition–Collection of Extrapure Substances)

Separation of No-Carrier-Added Radioactive Hafnium From Rock Samples

The Study of Radioactive Contaminations within the Production Processes of Metal Titanium for Low-Background Experiments

Impurity Effects on the Phase Transformations and Equations of State of Zirconium Metals

Preparation of 6N5 (99.99995%-Pure) Cadmium, Zinc, and Tellurium by Crystallization Methods

Express X-Ray Fluorescence Analysis of Technical-Grade Tantalum and Niobium: from Raw Materials to Products

Peculiarities of Application of the Gas Extraction Method for Determination of Hydrogen Content in Samples of Irradiated Zirconium Materials

The Preparation of the Multilevel Holes and Analysis of the Pure Titanium Surface

Impurity phases and their removal in Si purification with Al–Si alloy using transition metals as additives

Express X-ray fluorescent analysis of technical-grade tantalum and niobium: from raw materials to products

Determination of Hafnium in Zirconium by Spectrophotometry

Functional materials based on high-purity zirconium compounds for applications in alternative energy

Impurity Scavenging from Powder Metallurgy Titanium Alloys by Rare Earth Elements

Production of high-purity vanadium, chromium and titanium for use in low activation materials

Determination of niobium, tantalum, zirconium and hafnium in geological materials by extraction chromatography and inductively coupled plasma mass spectrometry

Impurity Element Analysis of Aluminum Hydride Using PIXE, XPS and Elemental Analyzer Technique

Determination of Ultra-Trace Platinum, Palladium, Ruthenium, Rhodium, and Iridium in Rocks and Minerals by Inductively Coupled–Plasma Mass Spectrometry Following Nickel Sulfide Fire Assay Preconcentration and Open Mixed Acid Digestion

Impurity Characterization by LA-ICP-MS in Terbium Metal after Solid State Electrotransport Purification

Research on the Removal of Impurity Elements During Ultra-High Purification Process of Terbium

The impurities distribution and purification efficiency of high-purity aluminum preparation by zone melting in vacuum