Abstract:4R generation nuclear power plants should work with metallic material of the highest quality, capable to resist in maximum safe conditions for 25-30 years. FeCrAl alloys are capable of such performance, because of the resistance to: oxidation at high temperatures, corrosion, erosion and penetrating radiations in liquid metal environments. In addition, such materials are capable of forming on their surface some oxide layers, textured and self-renewable, with high adhesion to metallic substrates. These properties can be improved by microalloying with metal elements such as Ti, Zr, Y, Hf in amounts of 1 to 3%. These chemical elements have high affinity to oxygen, being able to stabilize the structure of the superficial layer of oxide (alumina) and to increase adhesion to the metallic substrate. The FeCrAl alloys microalloyed with titanium were obtained in a VAR (Vacuum Arc Remelting) equipment in argon atmosphere (99.99% purity). There were obtained three batches microalloyed with 0.5%, 1% and 1.5% titanium, preserving the same Fe-14Cr-5Al metal matrix. In order to determine the chemical composition of the oxide layer and of the sample bulk, the EDAX analysis was performed. Microstructural features were revealed using SEM analysis. The results showed the capacity of the FeCrAl alloy to form oxide layers, with different textures and rich in elements such as Al and Ti. The compositional analysis performed on FeCrAl samples microalloyed with 0.5, 1.0 and 1.5% Ti in the central zone shows a relatively similar composition compared to the technological calculations made, reflecting the homogeneity of the alloy. The microhardness measurements performed on the cross sections of the metallic samples attest values in the range 163-183 HV0.2, falling within the normal range for these materials. These values are influenced by the presence of the alloying elements in the metallic matrix and by the homogeneous arrangement of constituents.

Production of high-purity vanadium, chromium and titanium for use in low activation materials

Effect of Ti/Cr Additive on Helium Diffusion and Segregation in Dilute Vanadium Alloys

Diffusion and Retention of Hydrogen in Vanadium in Presence of Ti and Cr: First-principles Investigations

The Study of Radioactive Contaminations within the Production Processes of Metal Titanium for Low-Background Experiments

Removing trace chromium from high concentration vanadium solution by photoreduction deposition with Ti–Zr solid solution

Consolidation and fabrication of vanadium and vanadium-base alloys

Preparation of high purity vanadium

Titanium Influence on the Microstructure of FeCrAl Alloys Used for 4R Generation Nuclear Power Plants

Parametric Study of Vanadium Extraction Process from Refining Tailings of Crude Titanium Tetrachloride

Titanium Impurity Control in V-Bearing Pig Iron Prepared via the Sodium Smelting of Vanadium–Titanium Magnetite

Vanadium ionic species from degradation of Ti-6Al-4V metallic implants: In vitro cytotoxicity and speciation evaluation

Toward High-Purity Vanadium-Based Materials: Fundamentals, Purifications, and Perspectives

Impurity Scavenging from Powder Metallurgy Titanium Alloys by Rare Earth Elements

High efficiency extractions of V, Cr, Ti, Fe and Mn from vanadium slag by microwave heating

Removal of the vanadium impurities from crude TiCl4 with high content of vanadium using a mixture of Al power and white mineral oil

Removal of V(V) from a Mixed Solution Containing Vanadium and Chromium Using a Micropocrous Resin in a Column: Migration Regularity of the Mass Transfer Zone and Analysis of Dynamic Properties

Extraction of the Rare Element Vanadium from Vanadium-Containing Materials by Chlorination Method: A Critical Review

Deuterium permeation of low-activation vanadium alloys possible for reuse in a short time in fusion reactors

Novel methods for the production of titanium

Microstructure and phase stability of TiVTa-based low-activation, multi- principal-element alloys