Abstract:The ongoing development of hydrogen permeation alloys promotes the wide application of hydrogen energy, especially in the industry of hydrogen production from the water-gas shift reaction (WGS). However, before being widely used, it is still necessary to improve their comprehensive properties, such as hydrogen permeation flux and durability. Pd and its alloy membranes have been deeply studied and have appeared in the market in recent years. Vanadium-based alloys, as a new substitute for these palladium membranes, not only have lower cost but also higher hydrogen permeability. However, huge challenges remain-especially the poor mechanical stability and high susceptibility to hydrogen embrittlement (HE) which is closely related to high absorbed hydrogen concentration of Vanadium. To solve these problems, this paper investigated the structure, hydrogen diffusion, hydrogen dissolution, and hydrogen embrittlement properties of vanadium-based quaternary (V-Nb-Ti-Co) alloys. On this basis, the boundary of ductile brittle transition hydrogen concentration (DBTC) was described. It was found that new phases (such as Co 2 (V, Nb) 3 , Co 7 Nb 6 etc.) will be formed in the structure when V is gradually replaced by Nb. Accordingly, the above changes the gradual substitution of V by Nb increased the hydrogen diffusivity and decreased hydrogen absorption. The overall effect is that the permeability decreases first and then increases, but larger hydrogen absorption will weaken the mechanical strength. As a result, the DBTC of the V-Nb-Ti-Co alloys shifts to the right somewhat (about 0.36 (H/M)), expanding the gap of the V-based single-phase alloys. This work demonstrated that the lower limit of DBTC can be adjusted by adding an appropriate amount of Nb in V-based alloys, thus simultaneously increasing the hydrogen permeability and hydrogen embrittlement resistance. This provides help and guidance for the design of novel hydrogen purification alloys.

Deuterium permeation of low-activation vanadium alloys possible for reuse in a short time in fusion reactors

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

Hydrogen Induced Hardening and Embrittlement of Vanadium Alloys

Binding Energy Crossover Mechanism Enables Low-Temperature Hydrogen Storage Performance of Dual-Phase TiZrCrMnNi(VFe) High-Entropy Alloy

Study on the modification of Zr-Mn-V based alloys for hydrogen isotopes storage and delivery

Iinfluence of alloying elements and hydrogen and oxygen on tensile properties of vanadium alloys

Deuterium permeation performance of V4Cr4Ti/RAFM steel joint with in-situ formed carbide interlayer during diffusion bonding

BRITTLENESS OF VANADIUM ALLOYS USED IN FUSION ENVIRONMENTS

Diffusion and Retention of Hydrogen in Vanadium in Presence of Ti and Cr: First-principles Investigations

Enhancing Disproportionation Resistance of Zr2Co-based Alloys by Regulating the Binding Energy of H Atom

Characterization for Fusion Candidate Vanadium Alloys

Hydrogen Isotope Exchange Experiments in High Entropy Alloy WMoTaNbV

Deuterium transport and retention properties of representative fusion blanket structural materials

Microstructure, hydrogen permeability and ductile-to-brittle transition-hydrogen concentration of (V, Nb)-Ti-Co quaternary alloys

Blistering Behavior and Deuterium Retention in Tungsten Vanadium Alloys Exposed to Deuterium Plasma in the Linear Plasma Device STEP

A new preparing method and performances of FeAl/Al2O3 tritium permeation barrier

Deuterium Retention and Ammonia Production from D-implanted 316L Stainless Steel: Insights for Future Fusion Reactors

Deuterium retention properties of vanadium beryllide (Be 12 V) for advanced neutron multiplier applications

Experimental and theoretical insights into vanadium-based alloys for room temperature hydrogen storage on the example of Ti16Cr22Zr5V55-Fe2Mn (x=0–3) alloys

Deuterium permeability and diffusivity in FeCrAl alloys for LWR cladding application

In-situ neutron diffraction during reversible deuterium loading in Ti-rich and Mn-substituted Ti(Fe,Mn)0.90 alloys