Abstract:With great power comes great challenges. For nuclear fusion, the holy grail of energy, taming the flame of a miniature star in a solid container remains one of the most fundamental challenges. A tungsten armour for the solid container marks a temporary triumph—a solution adopted by the world's largest fusion experiment, ITER—but may be insufficient for future challenges. High-entropy alloys (HEAs), which are characteristic of a massive compositional space, may bring new solutions. Here, we explore their potential as plasma-facing materials (PFMs) with a prototype W57Ta21V11Ti8Cr3 HEA that was designed by exploiting the natural-mixing tendency among low-activation refractory elements. Revealed by X-ray diffraction analysis and energy-dispersive X-ray spectroscopy, it predominantly consists of a single bcc-phase but with V, Ti, and Cr segregation to grain boundaries and at precipitates. Its yield strength improves ~60% at room temperature and oxidation rate reduces ~6 times at 1273 K, compared with conventionally used W. The Ti-V-Cr rich segregations and the formed CrTaO4 compound contribute to the improved oxidation resistance. However, the Ti-V-Cr rich segregations, along with the decreasing valence-electron concentration of the matrix by the addition of Ta, V and Ti elements, considerably increase the deuterium retention of the W57Ta21V11Ti8Cr3 HEA to ~675 multiples of recrystallized W. Moreover, its thermal conductivity decreases, being ~40% of W at 973 K. However, the maximum tolerable steady-state heat load is still ~84% of W because of its exceedingly high yield strength at elevated temperatures. Overall, despite being preliminary, we expect HEAs to play an important role in the development of advanced PFMs, for their disadvantages are likely to be compensated by their advantages or be overcome by composition optimization.

Characterization for Fusion Candidate Vanadium Alloys

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

Iinfluence of alloying elements and hydrogen and oxygen on tensile properties of vanadium alloys

Hydrogen Induced Hardening and Embrittlement of Vanadium Alloys

BRITTLENESS OF VANADIUM ALLOYS USED IN FUSION ENVIRONMENTS

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

A Preliminary Work on the Preparation for Neutron Irradiation of Advanced Fusion Materials Using Small Samples in China

MA-SPS-HIP Technique for Vanadium Alloys Preparation

Effect of the Iter Fw Manufacturing Process on the Microstructure and Properties of A Cucrzr Alloy

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Mechanical Properties of V-4Cr-4Ti after Exposure in Static Lithium at 650 °C

Mechanical characterisation of V-4Cr-4Ti alloy: Tensile tests under high energy synchrotron diffraction

Deuterium permeation of low-activation vanadium alloys possible for reuse in a short time in fusion reactors

Recent Progress in Developing and Qualifying Nanostructured Ferritic Alloys for Advanced Fission and Fusion Applications

Interfacial characterization of dissimilar-metals bonding between vanadium alloy and Hastelloy X alloy by explosive welding

Preliminary exploration of a WTaVTiCr high-entropy alloy as a plasma-facing material

Effects of V Addition on the Mechanical Properties at Elevated Temperatures in a Γ"-Strengthened NiCoCr-based Multi-Component Alloy

Exploration and optimization of copper-based alloys incorporating amorphizing elements for heat transfer applications

The Evolutionary Process of W-V Mixed Dumbbell in Tungsten Crystals: A Study about W-V Alloy As a Plasma-Facing Material in Fusion Devices

Investigation on intermetallic NiAl-Cr(Mo, Hf) alloys