Abstract:Rechargeable Li–CO2 batteries offer a sustainable strategy for CO2 utilization and energy storage in an environmentally friendly way. However, the current Li–CO2 batteries are restrained by unsatisfactory electrochemical performance and lack of cost-effectiveness in practical application. Thus, developing low-cost and highly effective electrode materials is crucial. Inspired by the concept of high nickel and low cobalt content in the electrode material, ultrafine Co0.1Ni0.9Ox nanoparticles decorated on carbon nanotubes (Co0.1Ni0.9Ox/CNT) are first developed in this work. Through various characterization techniques, the effects of doping Co2+ cations on the properties and electrochemical performance are systematically studied. At a current density of 100 mA g–1, a battery with the Co0.1Ni0.9Ox/CNT electrode delivers a high capacity of 5871.41 mA h g–1 with a Coulombic efficiency of 92.91% and a low overpotential of 3.94 V with an energy efficiency of 68%. At a cutoff capacity of 500 mA h g–1, the battery based on the Co0.1Ni0.9Ox/CNT electrode can be easily operated for 50 cycles without the trace of capacity degradation, which is nearly twice more than those with the NiO/CNT and CNT electrodes. Compared with the NiO/CNT electrode, the Co0.1Ni0.9Ox/CNT electrode exhibits superior electrocatalytic activity in oxidation and evolution reactions of CO2, which results from doping Co2+ cations in the NiO lattice to improve the p-type electronic conductivity. In addition, the polymer-like discharge products affected by doping Co2+ provide better reaction interfaces, curtailing the overpotential and reducing the life span. The results enlighten new ideas of fabricating high-performance and cost-effective electrode materials for prolonging the cycling life of Li–CO2 batteries toward practical applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02655.TEM images of NiO/CNT; TG–DTG curves of NiO/CNT and Co0.1Ni0.9Ox/CNT; nitrogen adsorption–desorption isotherm with the pore-size distribution of CNTs and NiO/CNT; full discharge–charge curves of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT; capacity-limited discharge–charge curves of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT; XRD patterns of NiO/CNT and CNTs; EIS results of Co0.1Ni0.9Ox/CNT; and specific surface area and pore volume of CNTs, NiO/CNT, and Co0.1Ni0.9Ox/CNT (PDF)This article has not yet been cited by other publications.

An environmentally friendly and low-cost catalyst for Li–CO2 batteries based on Co recovered from waste lithium-ion batteries

Co nanoparticles embedded into leaf-like porous carbon as a promising cathode catalyst for Li-O2 batteries

Carbon nanotubes with CoNi alloy nanoparticles growing on porous carbon substrate as cathode for Li-CO 2 batteries

High Value-Added Utilization of Waste Hydrodesulfurization Catalysts: Low-Cost Synthesis of Cathode Materials for Lithium-Ion Batteries

Ru Nanosheet Catalyst Supported by Three-Dimensional Nickel Foam As a Binder-Free Cathode for Li–CO2 Batteries

Microbial-derived functional carbon decorated hollow NiCo-LDHs nanoflowers as a highly efficient catalyst for Li-CO2 battery

Ultrafine Co-Doped NiO Nanoparticles Decorated on Carbon Nanotubes Improving the Electrochemical Performance and Cycling Stability of Li-CO<sub>2</sub> Batteries

Co-N-Doped Carbon As an Efficient Catalyst for Lithium–Oxygen Batteries

Waste to Treasure: Regeneration of Porous Co-Based Catalysts from Spent LiCoO 2 Cathode Materials for an Efficient Oxygen Evolution Reaction

Cobalt-decorated carbon nanofibers as a low overpotential cathode for nonaqueous Na-CO2 batteries

Nanofibrous Cathode Catalysts with MoC Nanoparticles Embedded in N-Rich Carbon Shells for Low-Overpotential Li-CO2 Batteries.

Heterostructured CoO-Co3O4 nanoparticles anchored on nitrogen-doped hollow carbon spheres as cathode catalysts for Li-O2 batteries

Waste to Treasure: Regeneration of Porous Co-Based Catalysts from Spent LiCoO2 Cathode Materials for an Efficient Oxygen Evolution Reaction

Sustainable Upcycling of Spent LiCoO2 to an Ultra-Stable Battery Cathode at High Voltage

Recycled Tandem Catalysts Promising Ultra‐low Overpotential Li‐CO2 Batteries

Three-Dimensional WCoFe Ternary Metal Oxide Nanowire Network as a Carbon-Free Cathode Catalyst for High-Performance Li–O 2 Batteries

Sustainable upcycling of spent LiCoO<sub>2</sub> to an ultra-stable battery cathode at high voltage

Ultrafine Co-Doped NiO Nanoparticles Decorated on Carbon Nanotubes Improving the Electrochemical Performance and Cycling Stability of Li–CO 2 Batteries

Efficient recovery of valuable metals from cathode materials of spent LiCoO2 batteries via co-pyrolysis with cheap carbonaceous materials

Activated Co in Thiospinel Boosting Li2CO3 Decomposition in Li-CO2 Batteries

Recycled Tandem Catalysts Promising Ultralow Overpotential Li-CO2 Batteries