Improving the Rechargeable Li‐CO2 Battery Performances by Tailoring Oxygen Defects on Li‐Ni‐Co‐Mn Multi‐Metal Oxide Catalysts Recycled from Spent Ternary Lithium‐Ion Batteries

Juan Wang,Ningning Feng,Shuang Zhang,Yang Lin,Yapeng Zhang,Jing Du,Senlin Tian,Qun Zhao,Gang Yang
DOI: https://doi.org/10.1002/advs.202402892
IF: 15.1
2024-05-19
Advanced Science
Abstract:The Li‐Ni‐Co‐Mn multi‐element metal oxide (Re‐NCM‐H3) catalyst with moderate oxygen vacancies is synthesized by recycling from spent ternary NCM cathode and using an annealing approach. Owing to double characteristics of muti‐metal active sites and oxygen vacancies, the Li‐CO2 battery based Re‐NCM‐H3 catalyst shows an excellent stability over 216 cycles and a lower overpotential of 1.54 V at 100 mA g−1. Rechargeable Li‐CO2 batteries are considered as a promising carbon‐neutral energy storage technology owing to their ultra‐high energy density and efficient CO2 capture capability. However, the sluggish CO2 reduction/evolution kinetics impedes their practical application, which leads to huge overpotentials and poor cyclability. Multi‐element transit metal oxides (TMOs) are demonstrated as effective cathodic catalysts for Li‐CO2 batteries. But there are no reports on the integration of defect engineering on multi‐element TMOs. Herein, the oxygen vacancy‐bearing Li‐Ni‐Co‐Mn multi‐oxide (Re‐NCM‐H3) catalyst with the α‐NaFeO2‐type structure is first fabricated by annealing the NiCoMn precursor that derived from spent ternary LiNi0.8Co0.1Mn0.1O2 cathode, in H2 at 300 °C. As demonstrated by experimental results and theory calculations, the introduction of moderate oxygen vacancy has optimized electronic state near the Fermi level (Ef), eventually improving CO2 adsorption and charge transfer. Therefore, the Li‐CO2 batteries with Re‐NCM‐H3 catalyst deliver a high capacity (11808.9 mAh g−1), a lower overpotential (1.54 V), as well as excellent stability over 216 cycles at 100 mA g−1 and 165 cycles at 400 mA g−1. This study not only opens up a sustainable application of spent ternary cathode, but also validates the potential of multi‐element TMO catalysts with oxygen defects for high‐efficiency Li‐CO2 batteries.
materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
What problem does this paper attempt to address?