Abstract:The preferentially selective extraction of Li+ from spent layered transition metal oxide (LiMO2, M = Ni, Co, Mn, etc.) cathodes has attracted extensive interest based on economic and recycling efficiency requirements. Presently, the efficient recycling of spent LiMO2 is still challenging due to the element loss in multistep processes. Here, we developed a facile strategy to selectively extract Li+ from LiMO2 scraps with stoichiometric H2SO4. The proton exchange reaction could be driven using temperature, accompanied by the generation of soluble Li2SO4 and MOOH precipitates. The extraction mechanism includes a two-stage evolution, including dissolution and ion exchange. As a result, the extraction rate of Li+ is over 98.5% and that of M ions is less than 0.1% for S-NCM. For S-LCO, the selective extraction result is even better. Finally, Li2CO3 products with a purity of 99.68% can be prepared from the Li+-rich leachate, demonstrating lithium recovery efficiencies as high as 95 and 96.3% from NCM scraps and S-LCO scraps, respectively. In the available cases, this work also represents the highest recycling efficiency of lithium, which can be attributed to the high leaching rate and selectivity of Li+, and even demonstrates the lowest reagent cost. The regenerated LiNi0.5Co0.24Mn0.26O2 and Na1.01Li0.001Ni0.38Co0.18Mn0.44O2 cathodes also deliver a decent electrochemical performance for Li-ion batteries (LIBs) and Na-ion batteries (NIBs), respectively. Our current work offers a facile, closed-loop, and scalable strategy for recycling spent LIB cathodes based on the preferentially selective extraction of Li+, which is superior to the other leaching technology in terms of its cost and recycling yield.

Repurposing Ni and Co from Alloy Scraps for the Synthesis of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathodes

Mechanochemical upcycling of spent LiCoO2 to new LiNi0.80Co0.15Al0.05O2 battery: An atom economy strategy

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Synthesis of high-nickel and high-performance ternary cathode materials through spent lithium-ion batteries recycling system

A feasible process for recycling valuable metals from LiNi0.5Co0.2Mn0.3O2 cathode materials of spent Li-ion batteries

Direct Recycling of Spent LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathodes Based on Single Oxalic Acid Leaching and Regeneration under Mild Conditions Assisted by Lithium Acetate

Study on the synthesis of NiCo2O4 as lithium-ion battery anode using spent LiNi0.6Co0.2Mn0.2O2 batteries

Highly efficient re-cycle/generation of LiCoO2 cathode assisted by 2-naphthalenesulfonic acid

NCM cathode active materials reproduced from end-of-life Li-ion batteries using a simple and green hydrometallurgical recycling process

An electrochemical approach to converting alloy scraps to (FeCrNiMnX) 3 O 4 high-entropy oxides for lithium-ion batteries

Regeneration of NCM622 from end-of-life lithium-ion battery cathode materials

Upcycling of Spent LiNi 0.33 Co 0.33 Mn 0.33 O 2 to Single-Crystal Ni-Rich Cathodes Using Lean Precursors

The regeneration and electrochemical performance study of NCM622 cathode materials

(Invited) Delineating the Intricacies Involved in the Synthesis of Cobalt-Free High-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries

Recycling and reutilization of LiNi0.6Co0.2Mn0.2O2 cathode materials from spent lithium-ion battery

Preferential Extraction of Lithium from Spent Cathodes and the Regeneration of Layered Oxides for Li/Na-Ion Batteries

High Value-Added Utilization of Waste Hydrodesulfurization Catalysts: Low-Cost Synthesis of Cathode Materials for Lithium-Ion Batteries

Direct Upcycling of Degraded LiCoO2 Material Toward High‐Performance Single‐Crystal NCM Cathode

Self‐Reconstruction of Highly Degraded LiNi0.8Co0.1Mn0.1O2 Towards Stable Single‐Crystalline Cathode

Preparation of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent Li-ion batteries

Subtractive transformation of cathode materials in spent Li-ion batteries to a low-cobalt 5 V-class cathode material