Abstract:Highly porous and hydrophobic silica aerogel is fabricated using fly ash and trona ore as the starting materials and the cost-effective ambient pressure drying technique. The optimal calcination parameters are determined as temperature of 850°C, holding time of 2h, and the trona ore/fly ash mass ratio of 1.4. The CO2 release mechanism during calcination is proposed and has been verified by the Thermogravimetric and Differential Scanning Calorimetry analysis (TG/DSC) and X-ray fluorescence (XRF) technique. The hydrogel is derived from reacting the calcination mixture with sulphuric acid solution, followed by filtration. The impurities can be effectively removed through water washing and solvent exchange processes. No ion exchange resin is used in this preparation method, and thus it is a safe, inexpensive and much more straightforward process. In order to minimize drying shrinkage, the hydrogel is first transformed into an alcogel by soaking in ethanol, after which the alcogel is surface modified with the hexane/ethanol/trimethylchlorosilane (hexane/ethanol/TMCS) mixture solution. It has been observed that the specific surface area, BJH desorption pore volume, and BJH desorption average pore diameter all first increase and then decrease so that reach to the maximum values once the heat treatment temperature approaches 500°C due to the oxidation of CH3 groups on the silica skeleton surface. The final product presents special characteristics including: (1) high thermal stability for maintaining hydrophobicity up to 476°C, (2) contact angle of the as-dried silica aerogel as high as 151°, (3) silica particle size of ca. 3–6nm, agreeing well with the model as reported, (4) and the 500°C heat treated sample possessing a large specific surface area of 856.2m2/g, a large pore volume of 2.92cm3/g, and a BJH desorption average pore diameter of 17.1nm. The proposed inexpensive approach produces silica aerogel with superior properties and is a scalable-manufacturing method for large-scale industrial production.

Facile Preparation of Lignocellulosic Xerogel by Alkali Freezing and Ambient Drying

Preparation of ambient-dried multifunctional cellulose aerogel by freeze-linking technique

Fabrication of Mesoporous Lignocellulose Aerogels from Wood Via Cyclic Liquid Nitrogen Freezing–thawing in Ionic Liquid Solution

Enhanced Mechanical Stability and Hydrophobicity of Cellulose Aerogels via Quantitative Doping of Nano-Lignin

Lignocellulose Aerogel from Wood-Ionic Liquid Solution (1-Allyl-3-methylimidazolium Chloride) under Freezing and Thawing Conditions.

Role of freeze-drying in cellulose-based aerogels: Freezing optimization strategies and diverse water treatment applications

An Efficient and Economic Approach for Producing Nanocellulose-Based Aerogel from Kapok Fiber

Fabrication and property of hydrophobic polyvinyl alcohol /clay aerogel via irradiation-crosslinking and ambient-drying

Fabrication of Elastic Silica-Bacterial Cellulose Composite Aerogels with Nanoscale Interpenetrating Network by Ultrafast Evaporative Drying

A Facile Strategy for Freeze-Drying Preparation of Silica Aerogel from Sodium Silicate

Facile preparation of lightweight and robust carbon aerogel monoliths for high-temperature thermal insulation and oil-water separation

Aerogel nanoarchitectonics based on cellulose nanocrystals and nanofibers from eucalyptus pulp: preparation and comparative study

Cellulose Aerogels from Aqueous Alkali Hydroxide–Urea Solution

Preparation and Comparative Study of Aerogels Based on Cellulose Nanocrystals and Nanofibers from Eucalyptus Pulp

Aerogel-like (low density and high surface area) cellulose monoliths and beads obtained without supercritical- or freeze-drying

Facile Preparation of Cellulose Aerogels with Controllable Pore Structure

Carnauba Wax‐Assisted Preparation of Eco‐Friendly Aerogels by the Ambient Pressure Drying Method and their Applications for Photothermal Evaporation and Dye Wastewater Treatment

A novel low-cost method of silica aerogel fabrication using fly ash and trona ore with ambient pressure drying technique

Anisotropic nanocellulose aerogels with ordered structures fabricated by directional freeze-drying for fast liquid transport

Sustainable cellulose-based aerogels fabricated by directional freeze-drying as excellent sound-absorption materials

Low-density, high-strength and large-scaled monolithic carbon aerogels fabricated via modified ambient pressure drying