Abstract:Homogeneous mesoporous lignocellulose aerogels were prepared from hardwood using 1-allyl-3-methylimidazolium chloride (AMImCl) as an ionic liquid (IL) via cyclic liquid nitrogen freezing-thawing (NFT, from -196 degrees C to 20 degrees C) treatment processes. The obtained hydrogels after NFT treatment were solvent-exchanged by acetone, washed with liquid carbon dioxide and then dried by releasing the carbon dioxide at the critical temperature. It was observed that the obtained aerogels after five-cycles of NFT treatment had open-structured 3-dimensional (3D) fibril-like networks. The surface areas and pore size distributions could be adjusted by controlling the NFT treatment cycles. However, the samples treated by common freezing-thawing (FT, from -20 degrees C to 20 degrees C) displayed a film-like 2D structure and low surface area. This may be ascribed to the difference of the assembled 'secondary units' formed during the freezing process. For instance, in the NFT process, 3D-like 'secondary assembly units' were squeezed out by small IL crystals formed during the ultra low temperature freezing process. These 'secondary assembly units' were able to build a large 3D network through the connection and overlap effect with cyclic NFT processes. However, the assembled 2D-like 'secondary assembly units' were squeezed out by large IL crystals in the common FT process due to the slow freezing process and finally were developed to a film-like structure. These 'secondary assembly units' could be linked together in a slow thawing process to form compact aerogels. This study provides a new means to fabricate novel mesoporous lignocellulose aerogels, which is crucial to fully utilize abundant lignocellulose biomass. The homogeneous mesoporous aerogels can be used as highly insulating materials with low thermal conductivity and also have appealing performance in sound absorption and noise reduction properties.

Fabrication of Mesoporous Lignocellulose Aerogels from Wood Via Cyclic Liquid Nitrogen Freezing–thawing in Ionic Liquid Solution

Lignocellulose Aerogel from Wood-Ionic Liquid Solution (1-Allyl-3-methylimidazolium Chloride) under Freezing and Thawing Conditions.

Cellulose Aerogels Prepared from Cellulose/amimcl Solutions

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Enhanced Mechanical Stability and Hydrophobicity of Cellulose Aerogels via Quantitative Doping of Nano-Lignin

Comparative Study of Aerogels Obtained from Differently Prepared Nanocellulose Fibers.

Aerogel nanoarchitectonics based on cellulose nanocrystals and nanofibers from eucalyptus pulp: preparation and comparative study

Preparation of ambient-dried multifunctional cellulose aerogel by freeze-linking technique

Nanocellulose Aerogels Inspired by Frozen Tofu

Cellulose Aerogels from Aqueous Alkali Hydroxide–Urea Solution

Lignocellulosic nanofibril aerogel via gas phase coagulation and diisocyanate modification for solvent absorption

Fabrication of Elastic Silica-Bacterial Cellulose Composite Aerogels with Nanoscale Interpenetrating Network by Ultrafast Evaporative Drying

Preparation of micro-convex rough interface carbon aerogels with cellulose-lithium bromide (LiBr) molten salt hydrate gelled system and application of oil-water separation

Preparation of a Novel Lignocellulose-Based Aerogel by Partially Dissolving Medulla Tetrapanacis via Ionic Liquid

Konjac glucomannan-based aerogels with excellent thermal stability and flame retardancy for thermal insulation application

Facile Preparation of Lignocellulosic Xerogel by Alkali Freezing and Ambient Drying

Preparation and Comparative Study of Aerogels Based on Cellulose Nanocrystals and Nanofibers from Eucalyptus Pulp

Nanocellulose-based aerogels with devisable structure and tunable properties via ice-template induced self-assembly

Facile Preparation of Cellulose Aerogels with Controllable Pore Structure

Preparation and Properties of Novel Superhydrophobic Cellulose Nanofiber Aerogels

Scalable manufacturing of light, multifunctional cellulose nanofiber aerogel sphere with tunable microstructure for microwave absorption