Abstract:Red mud (RM) cementitious materials were prepared with the thermally, thermoalkali- or thermocalcium-activated RM, steel slag (SS), and other additives. The effects of different thermal RM activation methods on the cementitious material hydration mechanisms, mechanical properties, and environmental risks were discussed and analyzed. The results showed that the hydration products of different thermally activated RM samples were similar with the main products being C-S–H, tobermorite, and Ca(OH) 2 . Ca(OH) 2 was mainly present in thermally activated RM samples, and the tobermorite was mainly produced by samples prepared with thermoalkali- and the thermocalcium-activated RM. The mechanical properties of the samples prepared by thermally and thermocalcium-activated RM had early-strength properties, while the thermoalkali-activated RM samples were similar to the late-strength type of cement properties. The average flexural strength of thermally and the thermocalcium-activated RM samples at 14 days were 3.75 MPa and 3.87 MPa respectively, whereas, the 1000 °C thermoalkali-activated RM samples only at 28 days was 3.26 MPa; the above data could reach the single flexural strength (3.0 MPa) of the first-grade pavement blocks of the building materials industry standard of the People's Republic of China-concrete pavement blocks (JC/T446-2000). The optimal preactivated temperature for different thermally activated RM was different; the optimal preactivated temperature for both thermally and thermocalcium-activated RM was 900 °C, and the flexural strength was 4.46 MPa and 4.35 MPa, respectively. However, the optimal preactivated temperature of thermoalkali activated RM at 1000 °C. The 900 °C thermally activated RM samples had better solidified effects for heavy metal elements and alkali substances. 600~800°C thermoalkali activated RM samples had better solidified effects for heavy metal elements. Different temperatures of thermocalcium-activated RM samples showed different solidified effects on different heavy metal elements, which may be due to the influence of thermocalcium activation temperature on the structural changes of the hydration products of the cementitious samples. In this study, three thermal RM activation methods were proposed, and the co-hydration mechanism and environmental risk study of different thermally activated RM and SS were further elucidated. This not only provides an effective method for the pretreatment and safe utilization of RM, but also facilitates the synergistic resource treatment of solid waste and further promotes the research process of replacing part of traditional cement with solid waste.

Binary reaction behaviors of red mud based cementitious material:Hydration characteristics and Na+ utilization

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Alkali-activated red mud in stabilizing marine dredged clay with low amount of cement

Utilization of red mud for producing a high strength binder by composition optimization and nano strengthening

Strengthening Mechanism of Red Mud with Calcium Oxide

Preparation of geopolymer concrete with Bayer red mud and its reaction mechanism

Synergistic Activation Mechanism and Long-Term Properties of a Solid Waste Cementitious Materials Based on Red Mud and Calcium Carbide Slag

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Study on hydration mechanism and environmental safety of thermal activated red mud-based cementitious materials

Evaluation of blends bauxite-calcination-method red mud with other industrial wastes as a cementitious material: properties and hydration characteristics.

Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand

Engineering Properties and Microstructure of Soils Stabilized by Red-Mud-Based Cementitious Material

Effect of red mud and phosphate on water resistance and hydration mechanism of magnesium oxychloride cement

Preparation mechanism and properties of thermal activated red mud and its geopolymer repair mortar

Investigation on red mud and fly ash-based geopolymer: Quantification of reactive aluminosilicate and derivation of effective Si/Al molar ratio

Preparation and performance of AACM with red mud and GGBFS: effectiveness of alkali activator

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Preparation and Research on Mechanical Properties of Eco-Friendly Geopolymer Grouting Cementitious Materials Based on Industrial Solid Wastes

Reuse of Pretreated Red Mud and Phosphogypsum as Supplementary Cementitious Material

Investigation of Alkali-Activated Slag-Based Composite Incorporating Dehydrated Cement Powder and Red Mud