Abstract:Our previous investigations indicate that the thermal shock resistance (TSR) of hydratable magnesium carboxylate (HMC) bonded Al2O3–MgO castables is superior to castables bonded with calcium aluminate cement as a result of the in-situ formation of micro-sized spinel (MgAl2O4). In the present study, to further enhance the TSR of HMC bonded castables, the submicron alumina powders were added into the castables to decrease the size of the spinel particle through a reaction of submicron alumina with nano magnesia pyrolyzed from HMC. The effects of submicron alumina powders on the TSR, slag corrosion resistance, and microstructure of HMC bonded castables were investigated. The results show that the size of the in-situ spinel particle decreases from approximately 2 μm to approximately 0.8 μm and the spinel gradually transforms into the aluminum-rich spinel after adding submicron alumina powders. The residual strength retention ratio of the samples raises from 37.5% to 50.0%, and the thermal stress damage resistance index (R՛՛՛՛) of the samples increases from 3.1 m to 7.2 m with the increase in the amount of submicron alumina to 2.0 wt% after thermal shock. The microcracks in the castables matrix of sample 2A are more and shorter than those of sample 0A after thermal shock. This is attributed to the fact that the resistance of microcracks propagation in the castables is enhanced via smaller spinel with uniform distribution. Besides, the penetration index of the castables decreases from 20.8% to 9.8% with the increase of submicron alumina content powders to 2.0 wt%. This is because the submicron alumina powders decrease the porosity of the castables, and the smaller size of the aluminum-rich spinel has a stronger adsorption capacity for Fe2+ ions.

Enhanced slag resistance of magnesia refractory castables with addition of BaSO4

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Effect of BaO and MnO on high-temperature properties and structure of blast furnace slag

Slag resistance mechanism of MgO–Mg2SiO4–SiC–C refractories containing porous multiphase aggregates

Effects of different additives on properties of magnesium aluminate Spinel–Periclase castable

Comparative study of B4C, Mg2B2O5, and ZrB2 powder additions on the mechanical properties, oxidation, and slag corrosion resistance of MgO–C refractories

Influence of magnesium-aluminum hydrotalcite on the microstructure and mechanical properties of magnesia castables

Simultaneous enhance of the thermal shock resistance and slag-penetration resistance for tundish flow-control refractories: the role of microporous magnesia

Structure and properties of lightweight magnesia refractory castables with porous matrix

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Wetting and corrosion behavior between magnesia–carbon refractory and converter slags with different MgO contents

Enhancing mechanism of improved slag resistance of Al2O3-spinel castables added with pre-synthesized (Al,Cr)2O3 micro-powder

Effects of La2O3 on the viscosity of copper smelting slag and corrosion resistance of magnesia refractory bricks

The role of CaO and MgO incorporation in chloride resistance of sodium carbonate-activated slag

Enhanced thermal shock resistance of hydratable magnesium carboxylate bonded castables via in-situ formation of micro-sized spinel

Assessing Magnesia Effect on Preparing Refractory Materials from Ferrochromium Slag

Preparation and characterization of HA bonded Al2O3–MgO based castables with superior slag resistance for the working lining of Si-killed stainless steel ladles

Influence of bonding systems on the properties of Al 2 O 3 -MgO refractory castables: Aluminate cement and alumina silica gel

Microstructure and enhanced slag resistance of Al2O3–SiC–C refractory castables with addition of ammonium metatungstate