Abstract:Hardening or softening associated with the increase of dislocation density is correlated with strain rate and dislocation density. Taking aluminum as a model material, we investigate the strain rate and dislocation density dependence of the strength and the accompanying hardening or softening effect upon a dislocation increase. This investigation is enabled by employing a newly developed crystal plasticity model, which is validated against the mechanical behaviors in an extremely wide strain rate range, and featured by a parameter-free mobile dislo-cation fraction law based on the exponential distribution of dislocation link lengths and an averaged dislocation velocity model that considers both thermally-activated waiting mechanism and drag-dominated running mechanism. Results show that at different strain rates, the material strength varies with a universal feature that it first softens as the dislocation density increases from a sufficiently low initial value, and then hardens after reaching the minimum strength, where the critical dislocation density separating the softening from hardening regimes increases with the strain rate. Microscopically, the strength dependence on dislocation density and strain rate originates from their influence on the two competing effects of a dislocation increase, where the hardening effect comes from the higher resistance to dislocation slip by increased forest dislocations while the softening effect comes from the larger quantity of mobile dislocations. These two competing effects are quantitatively evaluated by the crystal plasticity model and are further cast into the competition between the partial derivatives of normalized dislocation velocity and of normalized mobile dislocation density, and the governing equation for the critical dislocation density is thus furnished by balancing these two competing effects. Further, a complete map in the entire space of strain rate and dislocation density (epsilon, rho) is constructed for the zones of dislocation hardening or softening, where the zone-boundary curve for critical dislocation density exhibits a two-stage character and it agrees well with the available experimental data. Such a map is expected to help predict the trend for strength evolution under different serving conditions and also guide the material design according to the requirements for strength variation in service.

A unified physically-based model describing complex unloading behavior in cold and hot deformation process of aluminum alloys

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

Characterization of Hot Deformation Behavior and Constitutive Modeling of Al–Mg–Si–Mn–Cr Alloy

Evolution of austenite dislocation density during hot deformation using a physical dynamic recrystallization model

Modeling and 2-D discrete simulation of dislocation dynamics for plastic deformation of metal

Strain-rate dependent crystal plasticity model and aluminum softening/ hardening transition

Modeling and Characterization on Electroplastic Effect During Dynamic Deformation of 5182-O Aluminum Alloy

A Dislocation Density Based Crystal Plasticity Model of 3D Complex Sheet Metal Forming

A Physically Based Constitutive Model and Continuous Dynamic Recrystallization Behavior Analysis of 2219 Aluminum Alloy during Hot Deformation Process

A Physically-Based Constitutive Modelling of a High Strength Aluminum Alloy at Hot Working Conditions

Constitutive Modeling of the Hot Deformation Behavior in 6082 Aluminum Alloy

A Continuous Dynamic Recrystallization Constitutive Model Combined with Grain Fragmentation and Subgrain Rotation for Aluminum Alloy 2219 under Hot Deformation

A Unified Constitutive Model of Stress Relaxation of Ti-6Al-4V Alloy with Different Temperatures from Elastic to Plastic Loading

Study on hot deformation behavior and recrystallization mechanism of an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy based on machine learning

A Thermal Damage-Coupled Constitutive Model for Predicting Fracture and Microstructure Evolution and Its Application in the Hot Spinnability Process

A dislocation-based explanation of quasi-elastic release in shock-loaded aluminum

Dynamic precipitation and recrystallization behavior during hot deformation of Al-Zn-Mg-Cu alloy: Experiment and modeling

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation

Microstructure evolution mechanisms and a physically-based constitutive model for an Al–Zn–Mg–Cu–Zr aluminum alloy during hot deformation

Plasticity evolution of an aluminum-magnesium alloy under abrupt strain path changes

Analysis and Modeling of Stress-Strain Curves in Microalloyed Steels Based on a Dislocation Density Evolution Model