Abstract:High strain rate forming (HSRF) is promising to break through the conventional forming limit of materials and thus to form hard-to-deform components. During HSRF process, long-lasting micro-defects before fracture, i.e. adiabatic shear bands (ASBs) in compression and voids in tension, are significant characteristics existing in a large strain range. These defects bring about the non-destructive softening of stress and continuous exertion of ductility, in return, the stress responses affect the evolution of micro-defects. However, the interaction between stress responses and defects evolution has not yet been reflected in the existing models, resulting in a limited prediction accuracy. Aiming at this issue, the competition between hardening caused by thermal activated dislocation movements and the flow softening brought by micro-defects evolution was well modeled in this work. During the modeling, the relation between the normal strain and effect zone of ASBs was established via the modification of Bai-Dodd model by considering the geometric features of ASBs. Moreover, by introducing a rate-dependent ASB trace angle, the half width of ASBs was expressed as a function of maximum shear strain and critical instability strain. The effect of strain and strain rate to the evolution of voids under tensile conditions was taken into account by combining Hollomon hardening law with Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. Then, the interactions between micro-defects and structure related athermal stress were characterized by connecting volume fraction of voids and effective bearing area in tension and the intensity of flow localization with ASBs width in compression. As a consequence, a unified model of constitutive behaviors coupled with micro-defects evolution was established with considering rate-dependent hardening and softening. Applied to aluminum alloys, this model piedicts the stress responses, evolution of ASBs and voids, and low or negative strain rate sensitivity with high precision in large ranges of strain (0-0.6) and strain rate (0.001-5000 s(-1)). The proposed model is thus believed to be with a successful application in precise prediction and optimization of HSRF processes. (C) 2016 Elsevier Ltd. All rights reserved.

Modeling and Characterization on Electroplastic Effect During Dynamic Deformation of 5182-O Aluminum Alloy

Study on Electric Pulse-Assisted Plastic Deformation Behavior of 5182-O Aluminum Alloy

Acoustic Softening and Residual Hardening in Aluminum: Modeling and Experiments

Neural network-based ductile fracture model for 5182-O aluminum alloy considering electroplastic effect in electrically-assisted processing

Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy

Large strain flow curve characterization considering strain rate and thermal effect for 5182-O aluminum alloy

Investigation on Plastic Flow Behaviors of FCC Polycrystalline Aluminum under Pre-Cyclic Tension-Compression Loading: Experiments and Crystal Plasticity Modeling.

Dynamic tests and constitutive model for 7075-T6 aluminum alloy

Constitutive Modeling of the Hot Deformation Behavior in 6082 Aluminum Alloy

The Characteristics of Plastic Flow and a Physically-Based Model for 3003 Al–Mn Alloy Upon a Wide Range of Strain Rates and Temperatures

A thermal activation based constitutive model for the dynamic deformation of AA5083 processed by large-scale equal-channel angular pressing

A New Model to Describe Effect of Plastic Deformation on Elastic Modulus of Aluminum Alloy

Eddy Current Induced Dynamic Deformation Behaviors of Aluminum Alloy During EMF: Modeling and Quantitative Characterization

Analysis of electric pulse-assisted forming based on neural network plastic evolution model

Electrical-thermal-mechanical coupled modeling and simulation on deformation behaviors of Ti6554 alloy in electrically-assisted micro-tension

A Study on Dynamic Plastic Deformation Behavior of 5052 Aluminum Alloy

Modeling and Application of Constitutive Model Considering the Compensation of Strain During Hot Deformation

Experimental and Modeling Investigation on Anisotropic Plastic Flow of Metal Plates under Nonproportional Loading Conditions

Constitutive equation of electroplastic effect for 2060-T8 Al-Li alloy

A Unified Model for Coupling Constitutive Behavior and Micro-Defects Evolution of Aluminum Alloys under High-Strain-rate Deformation

Experimental and Physical-Based Constitutive Model Study of Fcc Metal over Wide Temperature and Strain Rate Ranges