Abstract:： In order to investigate the effects of stress triaxiality, Lode angle, temperature and strain rate on the fracture characteristics of 6061-T651 aluminum alloy materials, the mechanical property tests of materials are carried under different stress states, temperature and strain rate using universal material testing machine. Firstly, the mechanical property test results show that the fracture strain of 6061-T651 aluminum alloy material decreases with the increase of stress triaxiality. And also, the fracture strain of material related to the Lode angle parameter, especially the effect of the Lode angle more significantly at the range of lower stress triaxiality. When the temperature less than 250 ℃ , the temperature of material has significant influence on its flow stress, while the influence of temperature on its fracture strain can be ignored. While the temperature more than 250 ℃ , the temperature of material has greatly influence on its flow stress and fracture strain. Moreover, the strain rate has no significant effect on the fracture strain of 6061-T651 aluminum alloy. Subsequently, basing on the test results of mechanical properties, the Modified Johnson-Cook(MJC) criterion is obtained by modifying Johnson-Cook(J-C) fracture criterion, and the parameters of MJC and Modified Mohr-Coulomb(MMC) fracture criterion are calibrated. Finally, the impact test of sphere projectile penetrating the 6061-T651 aluminum alloy target plate is conducted on a one-stage gas gun, and also the ballistic limit velocity and failure mode of target are obtained. In order to verify the validity of the model and parameters, and the corresponding 3D model of projectile impact target is established by using ABAQUS/Explicit finite element software. The results showed that the prediction results of Lode angle dependent MMC fracture criterion is closer to the test compared with the Lode angle independent MJC fracture criterion.

Dynamic tests and constitutive model for 7075-T6 aluminum alloy

Dynamic Mechanical Behavior and Numerical Simulation of 6013-T4 Aluminum Alloy at Different Temperatures and Strain Rates

A modified Johnson–Cook model for tensile flow behaviors of 7050-T7451 aluminum alloy at high strain rates

Study on constitutive relationship of 6061 aluminum alloy based on Johnson-Cook model

Research and Revise on Constitutive Equation of 7050-T7451 Aluminum Alloy in High Strain Rate and High Temperature Condition

A Modified Johnson–Cook Model for 7N01 Aluminum Alloy under Dynamic Condition

Dynamic mechanical behavior and constitutive model of 3004 aluminum

Constitutive Model of Dynamic Softening Behavior of 7075 Aluminum Alloy During Hot Compression

Dynamic Mechanical Behavior of 6061 Al Alloy at Elevated Temperatures and Different Strain Rates

Strain Rate Sensitivity and Constitutive Models of Several Typical Aluminum Alloys

Strain Rate-Dependent Constitutive and Low Stress Triaxiality Fracture Behavior Investigation of 6005 Al Alloy

Study of dynamic mechanical behavior of 1060-H112 aluminum alloy: Experimental and numerical simulation

Experimental Study of Mechanical Properties at High Strain Rate and Constitutive Relation of Aluminum Alloy 2A70

Constitutive Model of Aviation Aluminum-Alloy Material in Metal Machining

A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy

Mechanical Behavior of Commonly Used Aeronautical Aluminum Alloys under Dynamic Tension

Study on Mechanical Properties and Constitutive Model of 5052 Aluminium Alloy

Experimental investigation on a dynamic constitutive relationship of 5A06 Al alloy

Dynamic Softening Behaviors of 7075 Aluminum Alloy

Dynamic Mechanical Properties and Modification of Fracture Criteria of 6061-T651 Aluminum Alloy

Constitutive Modeling of the Hot Deformation Behavior in 6082 Aluminum Alloy