Abstract:： In order to investigate the effects of stress triaxiality, Lode angle, temperature and strain rate on the fracture characteristics of 6061-T651 aluminum alloy materials, the mechanical property tests of materials are carried under different stress states, temperature and strain rate using universal material testing machine. Firstly, the mechanical property test results show that the fracture strain of 6061-T651 aluminum alloy material decreases with the increase of stress triaxiality. And also, the fracture strain of material related to the Lode angle parameter, especially the effect of the Lode angle more significantly at the range of lower stress triaxiality. When the temperature less than 250 ℃ , the temperature of material has significant influence on its flow stress, while the influence of temperature on its fracture strain can be ignored. While the temperature more than 250 ℃ , the temperature of material has greatly influence on its flow stress and fracture strain. Moreover, the strain rate has no significant effect on the fracture strain of 6061-T651 aluminum alloy. Subsequently, basing on the test results of mechanical properties, the Modified Johnson-Cook(MJC) criterion is obtained by modifying Johnson-Cook(J-C) fracture criterion, and the parameters of MJC and Modified Mohr-Coulomb(MMC) fracture criterion are calibrated. Finally, the impact test of sphere projectile penetrating the 6061-T651 aluminum alloy target plate is conducted on a one-stage gas gun, and also the ballistic limit velocity and failure mode of target are obtained. In order to verify the validity of the model and parameters, and the corresponding 3D model of projectile impact target is established by using ABAQUS/Explicit finite element software. The results showed that the prediction results of Lode angle dependent MMC fracture criterion is closer to the test compared with the Lode angle independent MJC fracture criterion.

Mechanical Behavior of Commonly Used Aeronautical Aluminum Alloys under Dynamic Tension

Dynamic tests and constitutive model for 7075-T6 aluminum alloy

Study of dynamic mechanical behavior of 1060-H112 aluminum alloy: Experimental and numerical simulation

Strain Rate Sensitivity and Constitutive Models of Several Typical Aluminum Alloys

Dynamic Mechanical Behavior and Numerical Simulation of 6013-T4 Aluminum Alloy at Different Temperatures and Strain Rates

Comparison of Mechanical Properties and Their Temperature Dependencies for Three Aluminium Alloys Under Dynamic Load

Dynamic tests and bird impact dynamic response analysis for a 2024-T3 aluminum alloy plate

Mechanical property tests and dynamic response analysis for 5A06 aluminum alloy plates subjected to underwater shock loading

Study on Mechanical Properties and Constitutive Model of 5052 Aluminium Alloy

Dynamic Mechanical Properties and Modification of Fracture Criteria of 6061-T651 Aluminum Alloy

Experimental Study of Mechanical Properties at High Strain Rate and Constitutive Relation of Aluminum Alloy 2A70

The Mechanical Properties of High Strength Al Alloy Sheet under Quasi-Static-dynamic Loading

Dynamic mechanical behaviors of 6082-t6 aluminum alloy

Dynamic Mechanical Behavior of 6061 Al Alloy at Elevated Temperatures and Different Strain Rates

Tensile Properties and Fractography of Three AA 2000 Series Aluminum Alloys Used for Aerospace Applications

Mechanical Behavior and Fracture Mechanism of 2219 Aluminum Alloy with Different Heat Treatment Conditions Under Dynamic Loading

Dynamic mechanical behavior and constitutive model of 3004 aluminum

Dynamic Mechanical Behavior and Microstructural Evolution of the Al-6Mg Alloy Subjected to Three Treatment Conditions

Effect of Test Temperature and Strain Rate on Dynamic Mechanical Behavior of Aluminum Alloy 2519A

Flow and Fracture Behavior of Aluminum Alloy 6082-T6 at Different Tensile Strain Rates and Triaxialities

Investigation on Yield Behavior of 7075-T6 Aluminum Alloy at Elevated Temperatures