Microstructure evolution and enhanced cryogenic toughness of laser welded dissimilar SA645/AISI304L joints via intercritical tempering
Chu Wu,Tong Zhang,Jie Chen,Wenhai Peng,Yu Cao,Dongqun Xin
DOI: https://doi.org/10.1016/j.jmrt.2024.03.036
IF: 6.267
2024-03-01
Journal of Materials Research and Technology
Abstract:In this study, we explored the impact of intercritical tempering on the microstructural evolution and mechanical properties of dissimilar welds formed through laser welding between 5%Ni steel (SA645) and austenitic stainless steel (AISI304L). Upon tempering at 500 °C, reversed austenite manifested within the weld metal. The volume proportion of reversed austenite in weld metal at room temperature increased first, exhibiting a maximum (∼10%) at ∼600 °C, and then decreased with increasing tempering temperature, which was associated with the diminished stability of austenite. Due to the change in tempering temperatures, two distinct types of reversed austenite were present, with one being located at the high-angle grain boundaries and the other within the martensite blocks. As the tempering temperature increased, the weld metal hardness decreased, reaching a minimum of ∼306 HV at 600 °C, and then increased. The dislocation density within the martensite matrix and the quantity of reversed austenite are the crucial factors to determine the hardness of weld metal. The cryogenic impact toughness of weld metal increased at first and then decreased as the tempering temperature increased. The maximum of ∼40 J for the cryogenic impact toughness was obtained when tempering at 600 °C. The low-temperature impact toughness of the weld metal was determined by the synergy of the TRIP effect of reversed austenite, the compatible deformation capability of dual-phase structure, and the crack propagation behavior.
materials science, multidisciplinary,metallurgy & metallurgical engineering