Abstract:In this paper, we report on a systematic study of the inductance and magnetic field penetration depth (λ) of polycrystalline NbN superconducting thin films. By employing a four-metal-layer fabrication process specifically designed for all-NbN SFQ circuits, we constructed a Superconducting Quantum Interference Device (SQUID) loop composed of two parallel NbN SNS junctions, NbN microstrips, and NbN ground planes for precise inductance measurement. At 4.2 K, as the linewidth increases from 1 μm to 30 μm, the inductance per unit length (Lu) of NbN microstrips significantly decreases, for example, the Lu of 250 nm-thick NbN microstrips drops from 0.907 pH/μm to 0.047 pH/μm. Compared to Nb, the Lu of polycrystalline NbN microstrips is approximately two to three times that of Nb, offering an advantage for manufacturing smaller superconducting inductors. Furthermore, we conducted simulation analysis using InductEx software to extract the λ of NbN films of varying thicknesses. The results indicate that as the film thickness increased from 45 nm to 600 nm, λ initially decreased sharply and then stabilized, with values ranging from 430 nm to 323 nm. Notably, once the film thickness exceeded 200 nm, λ remained essentially constant, even at a temperature of 10 K, where it showed good stability, albeit with a slight increase (about 50 nm) compared to 4.2 K. This dependence of λ on thickness is reasonably explained by considering the effects of NbN film thickness on the superconducting critical temperature and residual resistivity. These research findings not only deepen our understanding of the characteristics of superconducting films but also lay a solid foundation for the future design and manufacture of more compact superconducting circuits at the higher temperature of 10 K.

Inductance measurement of YBCO strip-lines made by ion irradiation

Estimation of Inductance Value in SQUID

High-Tc superconducting quantum interference filters (SQIFs) made by ion irradiation

The role of kinetic inductance on the performance of YBCO SQUID magnetometers

High--$T_c$ RF SQUIDs with Large Inductance of Quantization Loop

Studies of YBCO Strip Lines under Voltage Pulses: Optimisation of the Design of Fault Current Limiters

Fabrication and Properties of High Performance YBa 2 Cu 3 O 7-Δ Radio Frequency SQUIDs with Step-Edge Josephson Junctions

Electron beam lithography and ion implantation techniques for fabrication of high-Tc Josephson junctions

Long-time stable HTSC DC-SQUID gradiometers with silicon dioxide passivation for measurements with superconducting flux transformers

Inductance and penetration depth measurements of polycrystalline NbN Films for all-NbN single flux quantum circuits

Inductance and mutual inductance of superconductor integrated circuit features with sizes down to 120 nm. Part I

Arrays of nano-high-transition temperature superconductor quantum interference devices

Measuring kinetic inductance and superfluid stiffness of two-dimensional superconductors using high-quality transmission-line resonators

Niobium and niobium nitride SQUIDs based on anodized nanobridges made with an atomic force microscope

NanoSQUID magnetometry of individual cobalt nanoparticles grown by focused electron beam induced deposition

Direct measurement of single fluxoid dynamics in superconducting rings

A facility for cryogenic ion irradiation and in situ characterization of rare-earth barium copper oxide superconducting tapes

Wafer-Scale Characterization of a Superconductor Integrated Circuit Fabrication Process, Using a Cryogenic Wafer Prober

Single-Event Effect Responses of CMOS Integrated Planar Multiturn Inductors in LC-Tank Oscillators Under Heavy-Ion Microbeam Irradiation

Characterizing materials for superconducting radiofrequency applications-A comprehensive overview of the quadrupole resonator design and measurement capabilities

Investigation of nanoSQUID designs for practical applications