Abstract:This work compares 9 process routes that produce methanol from carbon dioxide using new and established thermochemical and electrochemical technologies. Net CO2 conversion is compared, and process efficiencies are benchmarked using side-by-side process models. New process routes using recently reported catalysts that enable methane pyrolysis (PY), and the dry reforming of methane (DMR) are modeled. Comparison is made with direct CO2 hydrogenation to methanol, the co-electrolysis of water and CO2 using solid oxide electrochemistry, and combinations of process technologies. Both electric heating and fuel switching to hydrogen are considered. Autothermal reforming of methane (ATR) is modeled as the conventional technology for reference. A new thermochemical approach in which CO2 reforming and methane pyrolysis reactions occur in separate reactors, with excess hydrogen produced and combusted for heat, (PY/DMR) was found to have the lowest levelized costs of CO2 mitigation varying from $50.4–53.9/t-CO2 using different electricity carbon intensities and levelized cost of methanol of $295.6/t. Methane pyrolysis offers the most flexible process solutions: it is nearly cost-competitive with reforming today ($295.6/t vs $277.3/t) using fuel switching and would emerge as the most economically viable process ($99.5/t) in future scenarios with very low electricity and natural gas costs and very high emissions penalties starting from 2030. Based on the emission factors from both electricity and natural gas across 195 countries around the world, 53 countries would result in net conversion of CO2 via pyrolysis today after heating, fugitive emissions, and energy use are taken into account.

Carbon dioxide methylation with toluene to para-xylene process: technical, economic and environmental evaluation

Thermodynamic and Mechanistic Analyses of Direct CO 2 Methylation with Toluene to para -Xylene

Novel Short Process for p -Xylene Production Based on the Selectivity Intensification of Toluene Methylation with Methanol

Techno-Economic Analysis of Methanol to Propylene Process

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Progress of Methylation of C6-8~Arene with Methanol: Mechanism, Catalysts, Kinetic/Thermodynamics and Perspectives

Excellent catalytic performance of Cu+ modified HZSM-5 to produce para-xylene via the toluene methylation reaction: High catalytic active site combining with channel shape selectivity

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Designing a Bifunctional Zrcuox/Hzsm-5 Catalyst for Selective Methylation of Toluene with Carbon Dioxide to Para-Xylene

Highly selective production of renewable p-xylene from bio-based 2,5-dimethylfuran and ethylene over Al-modified H-Beta zeolites

Selective Conversion of CO2 into para-Xylene over a ZnCr2 O4 -ZSM-5 Catalyst

Low-pressure CO2 Hydrogenation Coupled with Toluene Methylation to Para-Xylene Using Atomic Pd-doped ZnZrOx-HZSM-5

Selective Synthesis Of Para-Xylene And Light Olefins From Co2/H-2 In The Presence Of Toluene

Integrated Process for Increasing para-Xylene Production

Toward an Integrated Conversion of 5-Hydroxymethylfurfural and Ethylene for the Production of Renewable P-Xylene

Highly Selective Conversion of CO2 to Para-Xylene over Tandem Catalysts.

CO2-to-methanol: Economic and environmental comparison of emerging and established technologies with dry reforming and methane pyrolysis

Continuous experiment and simulation ofp-xylene oxidation promoted by CO2

Modeling of CO2-assisted Liquid Phase Oxidation of Para-Xylene Catalyzed by Transition Metals/bromide

Comparative Technical, Economic, and Environmental Analysis of Different Cyanamide Production Processes Optimized Through Heat Integration Design