Abstract:Addressing asphaltene precipitation challenges in oil production is vital to optimize oil production. This study navigates through various stages, from reservoir to transportation infrastructure. The disruption of thermodynamic equilibrium in asphaltene-rich crude oil leads to agglomeration, separation, and eventual deposition. Perturbations, such as pressure fluctuations, temperature shifts, and introducing solvents like CO 2 and hydrocarbon gases, commonly trigger this phenomenon. Despite longstanding efforts, the challenge persists in production facilities. With the global shift towards "Net Emission CO 2 ′′ processes, understanding the intricate interplay between asphaltene formation and CO 2 has become crucial. Injecting captured CO 2 underground for carbon storage or enhanced oil recovery is valuable. The novelty of this article is collecting, reviewing, and comparing the results of different CO 2 injections in asphaltenic oils. The influence of CO 2 injection on asphaltene deposition primarily hinges on alterations in temperature, pressure, concentration, and the presence of polar compounds. This article investigates static and dynamic thermodynamic parameters governing asphaltene separation and precipitation. Notably, the porous media's geometry significantly impacts the interaction between CO 2 and resident fluids, influencing precipitation extent. The review stands out by providing a comprehensive analysis of operational variables, emphasizing phase behaviour and flow assurance of CO 2 with different crude oil types. Parameters are scrutinized to gain insights into critical thresholds for formation damage control. The article delves into CO 2 injection methodologies in core-scale experiments and microfluidic devices, offering a condensed summary and comprehensive discussion of these practices. As a summary of the reviewed literature, we believe that asphaltene precipitation and further deposition are affected by the degree of oil phase equilibrium disturbance by adding CO 2 as a polar component. It is important to note that the relationship between temperature and asphaltene stability is complex, and particular temperature conditions may promote asphaltene deposition. Asphaltenes are generally less soluble at lower temperatures, and decreasing temperatures can lead to their precipitation. Conversely, higher temperatures can increase solubility. The reviewed articles showed that pressure and CO 2 concentrations hugely result in the separation of asphaltene molecules from the oil phase due to CO 2 injection. Brine, or formation water with high salinity, can influence asphaltene precipitation in crude oil systems. The interaction between brine and crude oil, especially in the presence of CO 2 injection for enhanced oil recovery (EOR) or other reservoir management strategies, can impact the stability of asphaltenes. A comprehensive collection and discussion were presented, including the fundamental concepts, such as solubility and miscibility behaviour of CO 2 and oil. Depending on the oil's reservoir pressure and asphaltene content, it is essential to know the miscibility conditions and select the proper injection pressure. In this article, the experts can fully understand CO 2 injection in asphaltenic oil on a lab scale with field-scale operational conditions.

Mitigating Asphaltene Deposition in CO2 Flooding with Carbon Quantum Dots

Investigating Asphaltene Precipitation and Deposition in Ultra-Low Permeability Reservoirs during CO2-Enhanced Oil Recovery

CO2-Induced In-Situ Targeted Precipitation of Asphaltene in Heavy Oil Reservoirs: Balancing Formation Gas Channeling Regulation and Wellbore Asphaltene Blockage Prevention

Study on the Asphaltene Precipitation in CO2 Flooding: A Perspective from Molecular Dynamics Simulation

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

Asphaltene precipitation and reservoir damage characteristics of CO2 flooding in different microscopic structure types in tight light oil reservoirs

A novel algorithm for asphaltene precipitation modeling in shale reservoirs with the consideration of capillary pressure during the CCUS processes

Pore-scale Imaging of Asphaltene-Induced Pore Clogging in Carbonate Rocks

Enhancing foam stability and addressing asphaltene deposition for improved oil recovery in CCUS applications using aerogel nanoparticles

Review and perspectives on CO 2 induced asphaltene instability: Fundamentals and implications for phase behaviour, flow assurance, and formation damage in oil reservoirs

Visualization of Effects of CO2 on Colloid and Asphaltene in Crude Oil

Pore-scale imaging of asphaltene deposition with permeability reduction and wettability alteration

Molecular Insights into Asphaltene Aggregation in Gas Flooding

Experimental investigating of the effect of CO2 injection parameters on asphaltene precipitation and formation damage in live oil

An Experimental Investigation of Interaction between CO2 Solution and Rock under Reservoir Conditions in the Jimsar Shale Oil Formation

Oil production enhancement, asphaltene precipitation and permeability damage during CO2-SAG flooding of multi-layer sandstone reservoirs

Promising combination of CO 2 enhanced oil recovery and CO 2 sequestration in calcite nanoslits: Insights from molecular dynamics simulations

The Difference in Damage to Low-Permeability Reservoirs by Different Injection Methods of CO2 Flooding

Pore-scale mechanisms of CO 2 storage in oilfields

Decreasing Asphaltene Precipitation and Deposition during Immiscible Gas Injection Via the Introduction of a CO2-Soluble Asphaltene Inhibitor