An Experimental Investigation of Interaction between CO2 Solution and Rock under Reservoir Conditions in the Jimsar Shale Oil Formation

Haibo He,Xinfang Ma,Fan Lei,Xinqiu Liu,Ming Jiang,Yue Li,Jianye Mou
DOI: https://doi.org/10.3390/pr12040673
IF: 3.5
2024-03-28
Processes
Abstract:Chemical sequestration is one important manner of CCUS. The injection of CO2 into an oil reservoir can not only sequestrate CO2 but also raise the oil recovery factor. The performance of chemical sequestration of CO2 depends on the interaction between CO2 solution and reservoir rock. In this paper, we have conducted three different scales of experiments, e.g., microscopic scale, core scale, and time scale, to fully investigate the interaction and resultant variation to mineral content, microscopic structure, porosity, and permeability under reservoir conditions (i.e., reservoir temperature of 90 °C) in Jimusar shale oil formation. The microscopic-scale experiment applied SEM and hyperspectral scanning to obtain microscopic pore throat structure and element distribution before and after soaking the rock in CO2 solution. The core-scale experiment employed XRD to evaluate mineral content variation caused by CO2 solution. Core flooding experiments were conducted to evaluate porosity and permeability variation caused by the dissolution of CO2 solution into the core samples. The third type of experiment was employed to investigate the effect of time sequence on the dissolution, in which the time ranged from 1 day to 14 days continuously. The experimental results indicate that, under Jimsar reservoir conditions, CO2 solution exhibits a relatively robust dissolution capability, causing significant alterations to the properties of the core samples. Specifically, the CO2 solution effectively dissolves carbonate upon contact. Calcite is the primary target for dissolution, followed by dolomite. In the presence of sufficient CO2, complete dissolution of all carbonates is achievable. On a microscopic scale, dissolution primarily occurs in the calcium-rich areas, leaving other regions unaffected. The typical pore size resulting from CO2 solution-induced dissolution ranges from several to dozens of micrometers. This dissolution process significantly enhances both porosity and permeability. For Jimsar shale core samples, porosity experienced an increase of over 20%, and permeability nearly doubled. Under Jimsar reservoir conditions at 90 °C, CO2 solution can consume all carbonates present in core samples within 8 days. The increase in porosity and permeability is rapid during the initial days and stabilizes around the 6th day. These research findings establish a theoretical foundation for CO2 chemical sequestration.
engineering, chemical
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to explore the interaction between carbon dioxide (\( \text{CO}_2 \)) solution and rocks under reservoir conditions and its impact on mineral content, microstructure, porosity and permeability. Specifically, the research aims to comprehensively understand the interaction mechanism between \( \text{CO}_2 \) solution and rocks under the conditions of the Jimusar shale oil layer (such as the reservoir temperature of 90°C) through experiments at different scales (micro - scale, core - scale and time - scale), and how this interaction affects the physical properties of rocks, especially the dissolution of carbonate minerals. The study found that the \( \text{CO}_2 \) solution exhibits a strong dissolving ability under high - temperature and high - pressure conditions, especially for the dissolution of calcium carbonate (calcite) and dolomite. This dissolution not only changes the mineral composition of the rocks but also significantly increases the porosity and permeability of the rocks. For the Jimusar shale core samples, the porosity increased by more than 20%, and the permeability almost doubled. These results provide a theoretical basis for \( \text{CO}_2 \) chemical sequestration and are helpful for enhancing oil recovery.