Abstract:Subsurface formations often contain multiple minerals with different wettability characteristics upon contact with nonaqueous-phase liquids (NAPLs). Constitutive relationships between microstructure heterogeneity and NAPL fate and transport in these formations are difficult to predict. Several studies have used pore-scale network models with faithful representations of rock pore space topology to predict macroscopic descriptors of two-phase flow, however wettability is usually considered as a spatially random variable. This study attempts to overcome this limitation by considering more realistic representations of rock mineralogy and wettability in these models. This is especially important for heterogeneous rocks where properties vary at the pore-scale. The work was carried out in two phases. First, pore-fluid occupancy maps during waterflooding were obtained by X-ray microtomography to elucidate the impact of pore wall mineralogy and wettability on water preferential flow paths and NAPL trapping within a heterogeneous aquifer sandstone (Arkose). Then, microtomography images of the rock were used to generate a hybrid pore network model (PNM) that incorporated both pore space topology and pore wall mineralogy. In-situ contact angles (CA) measured on the surface of different minerals were assigned to the network on a pore-by-pore basis to describe the exact wettability distribution of the rock (Pore-by-pore model). The equivalent network was used as input in a quasi-static flow model to simulate waterflooding, and the predictions of residual NAPL saturation and relative permeabilities were compared against their experimental counterparts. To examine the sensitivity of the model to the underlying fluid-solid interactions, we also used traditional methods of wettability characterization in the input data and assigned them randomly to the PNM. Wettability in this case was assessed from macroscale CA distribution of oil droplets on the surface of unpolished Arkose substrates released by spontaneous imbibition of water (Arkose model) and from pendant drop measurements on polished quartz (Quartz model). Our results revealed that the Pore-by-pore model predicted waterflooding with the highest accuracy among all three cases. The Arkose model slightly overestimated NAPL removal whereas the Quartz model failed to predict the experiments. More in-depth analysis of the Pore-by-pore and Arkose models showed that macroscopic transport quantities are less dependent to microstructure heterogeneity if minerals are distributed uniformly across the rock. The predictions herein indicate the importance of incorporating mineralogy and wettability maps to improve the prediction capabilities of PNMs especially in systems with high mineral heterogeneity, where minerals are nonuniformly distributed, or selective fluid-mineral interactions are targeted.

Pore-scale imaging of asphaltene deposition with permeability reduction and wettability alteration

Pore-scale Imaging of Asphaltene-Induced Pore Clogging in Carbonate Rocks

Effect of Heavy Constituent in Crude Oil on Wettability Change of Sandstone

Pore-scale Imaging of Displacement Patterns in an Altered-Wettability Carbonate

Pore-scale Imaging and Characterization of Hydrocarbon Reservoir Rock Wettability at Subsurface Conditions Using X-ray Microtomography

Effects of Microheterogeneous Wettability and Pore-Throat Structure on Asphaltene Precipitation in Tight Sandstone: Results from Nuclear Magnetic Resonance

Experimental investigation of effect of asphaltene deposition on oil relative permeability, rock wettability alteration, and recovery in WAG process

Microfluidic platform to evaluate asphaltene deposition during solvent-based extraction of bitumen

A New Waterflood Initialization Protocol With Wettability Alteration for Pore-Scale Multiphase Flow Experiments

iSCAL for Complete Rock Characterization: Using Pore-Scale Imaging to Determine Relative Permeability and Capillary Pressure

In Situ Characterization of Three-Phase Flow in Mixed-Wet Porous Media Using Synchrotron Imaging

Investigating Asphaltene Precipitation and Deposition in Ultra-Low Permeability Reservoirs during CO2-Enhanced Oil Recovery

Molecular interaction between asphaltene and quartz with different surface wettability: A combined study of experimental measurement and theoretical calculation

Imaging and Measurement of Pore‐Scale Interfacial Curvature to Determine Capillary Pressure Simultaneously with Relative Permeability

Evaluation of rock and fluid intermolecular interaction between asphaltene and sand minerals using electrochemical, analytical spectroscopy and microscopy techniques

Pore-Scale Imaging of Controlled-Salinity Waterflooding in a Heterogeneous Carbonate Rock at Reservoir Conditions

Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

Asphaltene precipitation and reservoir damage characteristics of CO2 flooding in different microscopic structure types in tight light oil reservoirs

Quantification of Methane-Induced Asphaltene Precipitation in a Multiple Contact Process

Impact of mineralogy and wettability on pore-scale displacement of NAPLs in heterogeneous porous media

A novel method for examining the influence of molecular and structural properties of the asphaltene fraction on the wettability change of the calcite surface