Abstract:This paper presents an AlN-based piezoelectric micromachined ultrasonic transducer (PMUT) with a double-beam suspended structure. In order to obtain greater deflection displacement and output sound pressure compared to standard systems, a suspended structure is proposed, achieved by utilizing double-sided deep reactive ion etching of the silicon substrate. This structure is capable of greatly reducing the tensile stress caused by deflection on the membrane edge, thereby improving the piezoelectric micromachined ultrasound transducer performance. Simulations are performed using the finite element method and COMSOL software, with results demonstrating that the suspension structure exhibits a lower resonant frequency and a larger membrane deflection displacement than other methods, implying higher penetration and acoustic energy levels. Thus, the sound pressure is improved by changing the PMUT structure. Moreover, a PMUT with a double-beam is fabricated, and the impedance diagram is determined with an impedance analyzer. The resonant frequency of the transducer was 31.88 kHz, while the sound wave received by the standard lead zirconate titanate (PZT) ultrasonic transducer was converted to a voltage of 277.5 mV. In comparison, the proposed PMUT demonstrates an improved acoustic emission performance. In addition, the electromechanical coupling coefficient of the suspended PMUT is observed to be approximately 3.08%, which is significantly better than that of a fully clamped PMUT. This demonstrates the strong electromechanical conversion performance of the proposed PMUT. Results from the transmission and reception air experiments prove that the proposed double-beam PMUT can potentially be used for ranging and wireless energy transmission applications.

Investigation of performance dependence on transduction diaphragm design for piezoelectric micromachined ultrasonic transducers

Enhancement of the Transmission Performance of Piezoelectric Micromachined Ultrasound Transducers by Vibration Mode Optimization

Enhancement of Transmitting Sensitivity of Piezoelectric Micromachined Ultrasonic Transducers by Electrode Design

Theoretical Modeling of Piezoelectric Micromachined Ultrasonic Transducers With Honeycomb Structure

Novel Mechanical Coupling Piezoelectric Micromachined Ultrasonic Transducers Based on Base Excitation System

Beam-Membrane Coupled Piezoelectric Micromachined Ultrasonic Transducers with Enhanced Transmitting Sensitivity

Coupled Piezoelectric Micromachined Ultrasonic Transducers Array with High Ultrasonic Emission Performance

Effect of Shared Cavity on Electromechanical Performance of Piezoelectric Based Micro-machined Ultrasonic Transducer Array.

PZT-Film-Based Piezoelectric Micromachined Ultrasonic Transducer with I-Shaped Composite Diaphragm

Design and Modeling of a Dual-Driving PMUT with Increased Round-Trip Sensitivity

Sensitivity—Bandwidth Optimization of PMUT with Acoustical Matching Using Finite Element Method

Design And Fabrication Of Piezoelectric Micromachined Ultrasound Transducer (Pmut) With Partially-Etched Zno Film

Piezoelectric Micromachined Ultrasonic Transducers with Micro-Hole Inter-Etch and Sealing Process on (111) Silicon Wafer

Quasi-Closed Diaphragm Based Piezoelectric Micromachined Ultrasonic Transducer with Reduced Q and Stress Sensitivity for In-Air Rangefinding

A Piezoelectric Micromachined Ultrasonic Transducer with Mechanical Grooves

Structure Design and Characterization of MEMS Piezoelectric Ultrasonic Transducer

Highly Sensitive Piezoelectric Micromachined Ultrasonic Transducer (pmut) Operated in Air

An Aln-Based Piezoelectric Micromachined Ultrasonic Transducer with a Double-Beam Suspended Structure

A Micromachined Piezoelectric Ultrasonic Transducer Operating in ${\rm D}_{33}$ Mode Using Square Interdigital Electrodes

Performance of Aluminum Nitride-Based Piezoelectric Micromachined Ultrasonic Transducers under Different Readout Configurations

Performance-Enhanced Piezoelectric Micromachined Ultrasonic Transducers by PDMS Acoustic Lens Design