Abstract:The tremendous advances flexible electronics has experienced have led to the demonstration and - in some cases - commercialization of a plethora of devices, such as foldable displays, ubiquitously integrated sensor systems, and imperceptible implants. All these systems call for specialized analog circuits capable to transmit and receive data, condition sensors, drive actuators or control powering devices. Nevertheless, the current availability of materials and processes compatible with flexible foils imposes limitations to the realization of high-performance flexible analog systems. Among state-of-the-art technologies, amorphous metal oxides – and especially Indium-Gallium Zinc-Oxide (IGZO) – thin-film-transistors (TFTs), are extremely suited due to their electrical and mechanical performance. Here, we present TFTs based on IGZO semiconductor and Al2O3 insulating layers on polyimide substrates. First, we summarize different approaches to reduce the transistor channel length (down to 160 nm), together with their influence on the AC performance. Even though sub-500 nm lengths are demonstrated for TFTs fabricated using vertical structures, direct laser writing and focused ion beam milling, the highest transit and oscillation frequencies of respectively 135 MHz and 398 MHz, are achieved by 500 nm long self-aligned TFTs. We then show how flexible IGZO TFTs enable the realization of complex, flexible analog circuits operating at frequencies up to 20 MHz. However, even if remarkable performances are demonstrated for flexible NMOS circuits, their unipolar characteristics results in limited gain, high power consumption and complex design. To overcome this, we also show how the complementation of IGZO with ptype carbon nanotubes results in flexible common-source CMOS amplifiers with gain of 28.7 dB.

A Wide Range Duty‐Cycle PWM Generator Using Oxide‐TFTs on a Flexible Substrate

On‐chip power supply generation for self‐contained electronics using oxide thin‐film transistors

A 2.4 mW 2.5 GHz multi-phase clock generator with duty cycle imbalance correction in 0.13 µm CMOS

High Performance A-PWM Μled Pixel Circuit Design Using Double Gate Oxide TFTs

P‐4: ΔV<sub>TH</sub> and V<sub>SS</sub> IR rise Compensable PAM and PWM Combined Oxide TFTs Mini‐LED Pixel Circuit Working at Low Voltage

A Differential Ring Oscillator With Tail Current Source Control Scheme Using N-Type Oxide TFTs

An Auto-zeroing In-pixel Voltage Comparator for High Accurate PWM Micro-LED Displays Based on LTPO TFTs

A 0.08%/V 32.3-Ppm/ $^{\circ}$ C 36.6-Khz Unregulated Current-Reuse Ring Oscillator with $v_{\mathrm{gs}}$ -Ratio-based Compensation Using One-Type-Only Resistor

A Novel PWM Signal-Generation Strategy for Pockels Cell Drivers

P-5.2: A gate driver circuit with a-IGZO TFTs for a 15-inch AMOLED display

The Implementation of Fundamental Digital Circuits with ITO-Stabilized ZnO TFTs for Transparent Electronics

Gate Driver on Array With Multiple Outputs and Variable Pulse Widths for Low-Temperature Polysilicon and Oxide (LTPO) TFTs Driven AMOLED Displays

A New Pixel Circuit for Micro-Light Emitting Diode Displays with Pulse Hybrid Modulation Driving and Compensation

A New Pixel Circuit for Active Matrix Mini&Micro Light Emitting Diodes

Bendable metal oxide thin-film transistors and circuits for analog electronics applications

P‐28: High‐speed Oscillator using Polycrystalline InGaO TFTs by Spray Pyrolysis on Polyimide Substrate for Flexible Electronics

A Sub-nW/kHz Relaxation Oscillator With Ratioed Reference and Sub-Clock Power Gated Comparator

38.2: An Accurate and Stable PWM Pixel Circuit Based on LTPO TFTs for AM‐Micro‐LED Display

A Performance Optimized Operational Amplifier Using Transconductance Enhancement Topology Based on a-IGZO TFTs

P-48: Integrated a-IGZO TFT Gate Driver with Programmable Output for AMOLED Display

P‐9: Student Poster: Two‐Mode PWM Driven Micro‐LED Displays with Dual‐Gate Metal‐Oxide TFTs