Abstract:A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals. • The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated. • The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low. • The performance indicator (R 2 ) of the studied responses was higher than 0.95.

Electrocoagulation pre-treatment to simultaneously remove dissolved and colloidal substances and Ca2+ in old corrugated container wastewater

A Combined Electrocoagulation-Electrooxidation Treatment on Ctmp Wastewater

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

Chemical oxygen demand and tannin/lignin removal from paper mill wastewater by electrocoagulation combined with peroxide and hypochlorite treatments

Electrocoagulation in a packed aluminium scraps anode reactor for mineral processing wastewater treatment

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Coagulation and ozonation treatment of biologically treated wastewater from recycled paper pulping industry: effect on the change of organic compounds

Evaluation and optimization of electrocoagulation for treating Kraft paper mill wastewater

Enhancing the Performance of the Electrocoagulation−Filtration System Treating Mariculture Tailwaters by Using Alternating Pulse Current: Effects of Current Density and Current Conversion Period

Operating conditions on the optimization and water quality analysis on the advanced treatment of papermaking wastewater by coagulation/Fenton process

Treatment of wastewater from adhesive-producing industries by electrocoagulation and electrochemical oxidation

Developing an Efficient Processing System Treatment for the High Concentration of Eucalyptus Chemical Mechanical Pulp Wastewater

COD removal, decolorization, and energy consumption of electrocoagulation as a wastewater treatment process

Comparison between sinusoidal AC coagulation and conventional DC coagulation in removing Cu2+ from printed circuit board wastewater

Advanced Treatment of Paper Mill Wastewater Using Electro-Fenton Process with Novel Catalytic Particle Electrodes

Study on treatment of paper mill wastewater by electrocoagulation and its sludge analysis

Electrocoagulation process for spent caustic treatment: Optimization, sludge analysis and economic studies

Treatment of highly concentrated tannery wastewater using electrocoagulation: Influence of the quality of aluminium used for the electrode

Treatment of Cathodic Electrocoating Wastewater by Coagulation and Ceramic Membrane Filtration

Study on the treatment of Cu2+-organic compound wastewater by electro-Fenton coupled pulsed AC coagulation