Abstract:Realizing accurate positioning with the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) closed-loop system depends on accurate high-precision calibration of the visual measurement system, which has a great impact on collision avoidance and accurate positioning. We designed fiducial fibers for the calibration of the LAMOST closed-loop system to provide accurate fiducial positions for visual measurement. The benchmark position accuracy of the fiducial fibers is a key factor affecting the accuracy of the visual measurement system; the more accurate the fiducial fiber positions are, the higher the visual measurement correction accuracy. In this study, three measurement methods were used to obtain the fiducial fiber positions, namely, measuring the hole positions using a coordinate measuring machine, imaging the fiducial fibers using a calibrated photographic system, and directly measuring the fiducial fiber spatial positions using a laser tracker. By evaluating the fiber positions obtained via the three methods, we can obtain a stable and reliable fiducial fiber position benchmark. A fiducial fiber positions evaluation method based on an optimal residual criterion is proposed, and the optimal residual solution for a small calibration target (SCT) is used to evaluate the optimal fiducial fiber measurement method. Specifically, the fiducial positions obtained via each of the three methods are used to invert the camera calibration parameters, which are then used to calculate the physical position of an SCT. Finally, the residual value between the calculated and theoretical positions is taken as the standard for evaluating the fiducial fiber measurement benchmark performance. The results show that the fiducial fiber positions measured using the laser tracker can be applied to effectively calibrate the photographic system, enabling the LAMOST vision measurement system to achieve a positioning accuracy of nearly 10 (mu)m with the camera 20 m from the focal surface, whereas the accuracy is within 20 (mu)m for similar to 95% of the measurement points.

Fiber-artefact methodology and calibration framework for Brillouin-based fiber sensing

Micro-scale fiber-optic force sensor fabricated using direct laser writing and calibrated using machine learning.

Mapping the aberrations of a wide-field spectrograph using a photonic comb

Broadband calibration-free cavity-enhanced complex refractive index spectroscopy using a frequency comb

Optical Fiber Sensing Cables for Brillouin-Based Distributed Measurements

A New Optical Fiber Sensor And Its Calibration Method

Research on Reference Fiber for Closed-Loop Measurement of Spectral Survey Telescope

Distributed Dynamic Strain Sensing Based on Brillouin Scattering in Optical Fibers

Experimental Analysis On Calibration Of Instrument Broadening In A Lidar System With Fabry-Perot Etalon

State-of-the-Art Methods for Determining the Frequency Shift of Brillouin Scattering in Fiber-Optic Metrology and Sensing (Review)

Long-Range High-Spatial-Resolution Distributed Measurement by a Wideband Brillouin Amplification-Boosted BOCDA

Photonic comb: a stabilized single-mode fiber etalon for wavelength calibration

Bragg gratings in multi-mode fiber optics for wavelength calibration of GAIA and RAVE spectra

Evaluation Method to Obtain a Fiducial Fiber Metrology Benchmark for the Large Sky Area Multi-Object Fiber Spectroscopic Telescope

Compact high-resolution FBG strain interrogator based on laser-written 3D scattering structure in flat optical fiber

A New Method For Measuring The Position Of The End Of Optical Fibers For Lamost - Art. No. 701444

Hybrid Fiber-Optic Sensing Integrating Brillouin Optical Time-Domain Analysis and Fiber Bragg Grating for Long-Range Two-Parameter Measurement

Multifunction Fiber Optic Sensing System for Smart Applications

94 km Brillouin distributed optical fiber sensors based on ultra-long fiber ring laser pumping]

Optoelectronic hybrid oscillating fiber-optic sensor with attosecond precision and reconfigurable sensitivity

The Measurement System for Fiber Positioning Unit of Lamost