Abstract:Distributed optical fiber sensing techniques have gradually played a prominent role in nondestructive structural health monitoring in the past decade due to their distinctive high durability, large data transmission bandwidth and inherent immunity to electric or electromagnetic interference. Brillouin opticaltime domain reflectometry called BOTDR, as a newly developed distributed optical fiber sensing technique, is capable of measuring the strain rising along whole sensing optical fiber. However, its measuring linearity, the precision and the applicability are uncertain yet for different types of sensing optical fibers; thus the calibration must be carried out before used. Using a calibration system for distributed optical fiber strain sensors, designed and made by authors, this paper investigated the linearity, the precision and the applicability of the nylon-jacketed optical fibers, whose strain was measured by BOTDR and strain gauges. The sensing optical fibers together with some strain gauges were all stuck to the surface of a steel cantilever with uniform strength, and then the cantilever was loaded step by step. Also, the theoretical calculation was carried out for reference. The measuring results of the sensing fibers showed a good linearity, and the correlation coefficients of it, based on the references values from strain gauges and theoretical calculation, were both more than 0.99. The relative errors attributed to both reference values can meet the needs of engineering application. And finally the conclusion can be made that the nylon jacketed optical fiber sensors have enough measure linearity, precision and applicability for practical use, also this calibration method provides an efficient way to further case study.

A New Optical Fiber Sensor And Its Calibration Method

Microfiber Optical Sensors: A Review

Coiling an Optical Fiber for Long-Range Dynamic Displacement and Force Sensing

Research of a Reflective Fiber-Optic Displacement Sensor with Intensity Compensation

Near Common-Path Optical Fiber Interferometer for Potentially Fast On-Line Microscale-Nanoscale Surface Measurement

Design of a Reflective Intensity Optical Fibre Bundle Displacement Sensor

A Fiber Strain Sensor with High Resolution and Large Measurement Scale

Calibration test researches on distributed optical fiber strain sensors

Fiber-Optic Microstructure Sensors: A Review

Multiparameter measurement sensor based on no-core fiber

Optical Fiber Sensors Based on Core-Offset Structure: A Review

Micro-scale fiber-optic force sensor fabricated using direct laser writing and calibrated using machine learning.

Fiber-sensor alignment based on surface microstructures

Multi-parameter Measurement Sensor Based on No-Core Fiber

Fiber Michelson Sensor Signal Processing by Using of Optical Bistable Device in Frequency Domain

Design, sensing principle and testing of a novel fiber optic displacement sensor based on linear macro-bending loss

A New Fiber Optic Sensor for Inner Surface Roughness Measurement

Optical fiber sensor based on helical Fibers: A review

The Research of Optical Fiber Sensor Calibration Based on Acoustic Sensor Calibration System

Study on calibration of distributed optical fiber sensors based on BOTDR

From Fiber Layout to the Sensor: Preparation Methods as Key Factors for High-Quality Coupled-Core-Fiber Sensors