Abstract:The vapor-box is a liquid metal based design to cope with the demanding conditions of the divertor. This design relies on the recirculation of lithium by evaporation and condensation. An issue to this approach is the safety risks of Li-D/T formation and co-deposition on both the vapor-box walls - leading to possible recirculation impedance- and on the first wall leading to unacceptable tritium retention. Additively manufactured tungsten Capillary Porous Structure (CPS) samples filled with Li were exposed to high heat flux D plasmas in the linear plasma device Magnum-PSI and Li-D co-deposition was measured as a function of substrate temperature, estimated to be in the range 200-428 C and distance between 25-85 mm to the plasma beam center. The D:Li ratio was determined via in-situ ion beam diagnostics (NRA and EBS) and the spectra analyzed simultaneously to maximise the precision of the measurement. The experimental results approach close to the theoretical maximum at 40:60 D:Li ratio and the thickness of the deposited films was 0.02 - 3.2 m. For witness plate temperatures above 400 C Li films under 150 nm in thickness were deposited and show lower D:Li ratios, as low as 5:95 D:Li ratio. At these temperatures the evaporation rate from the WPs is close to the deposition rate, and the decomposition pressure for LiD becomes comparable to the operational pressure in the vessel during the discharge. SOLPS-ITER simulations were also conducted to complement the experimental data. The results were used to narrow the range of CPS surface temperature to between ^{\circ} ^{+} ^{+} \%$, which matches well with the value determined from a quartz crystal microbalance. Due to limitations in the modeling of neutral interactions with Li coated surfaces, the SOLPS-ITER modeling does not well recreate the observed Li and D deposition layers on the WPs, indicating that this aspect of the modeling in Eirene needs improvement to accurately model plasmas containing significant quantities of Li. However, SOLPS-ITER simulations should be extended to include LiD molecules and improve the accuracy of heat flux towards the target to improve the comparison with experimental data.

LIA-QMS method for the quantity analysis of the hydrogen isotopes retention in first-wall components of Globus-M2 tokamak

Depth Resolved Analysis of Hydrogen in W7-X Graphite Components Using Laser-Induced Ablation-Quadrupole Mass Spectrometry (LIA-QMS)

Deuterium retention in co-deposition with lithium in Magnum-PSI: experimental analysis and comparison with SOLPS-ITER

Quantitative Characterization of Helium in the ITER-like Co-Deposition Layer by Laser-Induced Breakdown Spectroscopy

First results of Laser-Induced Desorption - Quadrupole Mass Spectrometry (LID-QMS) at JET

Quantitative analysis of hydrogen isotopes in hydrogen storage material using laser-induced breakdown spectroscopy

Hydrogen depth profiles using laser-induced breakdown spectroscopy ( LIBS ) on graphite target of divertor in LHD

Ex-situ Quantification of Impurity Deposition Depth on HL-2A Divertor Graphite Tile by Laser-Induced Breakdown Spectroscopy

Hydrogen content in divertor baffle tiles in Wendelstein 7-X

Characterization of Deuterium Retention and Co-Deposition of Fuel with Lithium on the Divertor Tile of EAST Using Laser Induced Breakdown Spectroscopy

Quantitative analysis of deuterium in zircaloy using double-pulse laser-induced breakdown spectrometry (LIBS) and helium gas plasma without a sample chamber

Ex-situ Diagnosis of Deuterium Retention and Carbon Deposition on Shaped Tungsten Castellated Blocks Exposed in KSTAR by Laser-Induced Breakdown Spectroscopy

HD gas analysis with Gas Chromatography and Quadrupole Mass Spectrometer

Characterization on deuterium retention in tungsten target using spatially resolved laser induced desorption-quadrupole mass spectroscopy

Analyses of Deuterium Retention in Tungsten and Graphite First Wall Materials by Laser-Induced Ablation Spectroscopy on EAST

Influence of Heating Rate and Storage Condition on Thermal Desorption of Deuterium in Tungsten

Mass Spectrometric Control of the Process of Cleaning and Degassing of Protective Graphite Tiles of the Globus-M2 Tokamak

Deuterium loading of redeposited-like W coatings present in tokamaks by ion implantation

Cross Section of 15N-2D Nuclear Reactions from 3.3 to 7.0 MeV for Simultaneous Hydrogen and Deuterium Quantitation in Surface Layers with 15N Ion Beams

Quantitative determination of hydrogen isotopes using laser-induced breakdown spectroscopy

High Spatial Resolution Mapping of Deposition Layers on Plasma Facing Materials by Laser Ablation Microprobe Time-of-flight Mass Spectroscopy