Abstract:First, different PP foam samples were prepared by different core‐back distances of the mold in the injection molding machine above the picture, and they can be summarized into two categories: high cell density PP foam material (with a fine and dense cell structure) and low cell density PP foam material (with a large size distribution of uneven cell structure). Below the injection molding machine are the flame retardant mechanisms of the two foam materials, which can generate two different carbon layer structures through continuous burning. At the far right of the picture is the reason for the two different carbon layers, mainly due to the different degrees of gas escape from the PP foam materials during combustion. In previous studies, the effect of cell structures of polypropylene (PP) foam materials on flammability behavior had been largely overlooked. In this work, ammonium polyphosphate and pentaerythritol were used as intumescent flame retardants (IFR) for PP, and then the PP‐IFR flame retardant foams were prepared by using injection foaming technology with two different weight reduction methods (same mold volume before foaming and after foaming). The results showed that the average cell size of all the PP‐IFR flame retardant foams in the 10% to 30% weight reduction was less than 100 μm. The PP‐IFR flame retardant foams with an average cell diameter of 26.22 μm and cell density of 7.88 × 106 cells/cm3 had the best limiting oxygen index (LOI) of 27.9%. In addition, the PP‐IFR flame retardant foams with better foaming quality had a higher LOI and a denser foam carbon layer whatever the weight reduction methods, resulting in better flame retardant properties. The escape of gases from the foamed and un‐foamed areas not only reduced the concentration of flammable gases but also led to the collapse and rupture of the foam carbon layer during the combustion process. Hence, it provides guidance for preparing PP foam materials with excellent flame retardancy.

Development of polyamide12 composite foam by supercritical CO2: The effect of flame retardants on foaming behavior and properties

Superlight flame-retardant poly(aryl ether ketone)/polyurea nanocomposite foam with excellent solvent-resistance and shape memory performance

Effect of the Flame Retardants and Glass Fiber on the Polyamide 66/Polyphenylene Oxide Composites

Expandable Graphite, Aluminum Diethylphospinate and Melamine Polyphosphate as Flame Retarding System in Glass Fiber-Reinforced PA6

Halogen‐free Intumescent Flame Retardancy and Mechanical Properties of the Microcellular Polypropylene with Low Expansion Ratio Via Continuous Extrusion Assisted by Subcritical CO 2

Effect of different IFS (MWCNTs, BN, and ZnO) on flame retardant, thermal and mechanical properties of PA6/aluminum diisobutyl phosphinate composites

Flame Retarded Rigid Polyurethane Foams Composites Modified by Aluminum Diethylphosphinate and Expanded Graphite

Preparation of P/N/Si‐containing covalent organic framework‐based flame retardants and their application in epoxy resins

Preparation, Properties, and Mechanism of Flame-Retardant Poly(vinyl alcohol) Aerogels Based on the Multi-Directional Freezing Method

Synergistic Effect Of Expandable Graphite And Aluminum Hypophosphite On Flame-Retardant Properties Of Rigid Polyurethane Foam

A highly efficient melamine/red phosphorus flame retardant for polyurethane‐based foams

Synergistic effect of expandable graphite and phenylphosphonic-aniline salt on flame retardancy of rigid polyurethane foam

Synthesis and Characterization of a New Copolymer Consisting of Polyamide 1210 and Reactive Phosphorus-Nitrogen Flame-Retardant

Synergistic flame retardant coatings for carbon fibre-reinforced polyamide 6 composites based on expandable graphite, red phosphorus, and magnesium oxide

Effects of Melamine Cyanurate and Aluminum Hypophosphite on the Flame Retardancy of High-Impact Polystyrene

A new strategy for constructing polypropylene composite foams with excellent ablation resistance and flame retardancy

Synergistic flame‐retardancy of lamellar cerium phenylphosphonate and aluminum diethylphosphinate towards suppressing "candlewick effect" of polyamide 6/carbon fiber composites

Ultra-light polylactic acid/combination composite foam: A fully biodegradable flame retardant material

Effect of aluminum diethylphosphinate on flame retardant and thermal properties of rigid polyurethane foam composites

Synthesis of a novel triazine-based intumescent flame retardant and its effects on the fire performance of expanded polystyrene foams

Effect of foaming behavior of polypropylene foams on flame retardant properties under different weight reduction methods