Abstract:Heterogeneous nanostructured materials, including metals, alloys, and composites, have attracted significant scientific interest because of their outstanding performance in overcoming the strength-ductility trade-off, enhancing fatigue strength, and reducing friction and wear damage. In this study, we developed a new micromechanical model to predict the overall mechanical response of heterogeneous nanograined metals that consist of plastically deformable soft and hard domains. This dual-domain heterogeneous structure was modeled as a matrix-inclusion system, and the problem was solved through a secant-moduli approach that considered the existence of geometrically necessary dislocation (GND) pileups at the domain boundaries. We assumed that the inclusions are aligned along one direction according to experimental observations. A significant improvement in this development from previous micro-mechanical models was that the hetero-deformation induced extra strengthening inside the plastically deformable inclusions of different shapes due to the GND pileups was taken into account. In this process, the stress-strain responses of the constituent phases of various grain sizes that spanned over four orders of magnitude are also established by the dislocation density-based model. In accordance with Eshelby's equivalent-inclusion principle, the inclusions are taken to be of spheroidal shape, with an aspect ratio (i.e., length-to-diameter ratio, denoted by β) that could be much larger or smaller than unity. We considered in details the condition that the overall uniaxial tension is applied along the direction of the aligned inclusions, and examined the consequences if the extra strengthening is not considered and if it is considered. It is found that, if extra strengthening was not considered, the inclusion shape had a significant influence on the strain-hardening capability of the heterogeneous metals. The strain-hardening rate increased with increasing <math>β</math> if <math>β≥1</math>, whereas it decreased with increasing <math>β</math> if <math>β<1</math>, which resulted in a maximum strain-hardening rate at <math>β=100</math> and a minimum one at <math>β=0.5</math> among all the aspect ratios considered. Interestingly, the strength-ductility trade-off could be overcome by modulating only the shape of the inclusions. In contrast, if extra strengthening was incorporated, the variation of the strain-hardening rate was reversed because larger <math>β</math> (as <math>β≥1</math>) provided less strain partitioning, lower GND density, and reduced back stress, whereas bigger <math>β</math> (as <math>β<1</math>) yielded higher ones. When the overall uniaxial stress was applied normal to the direction of the aligned inclusions, the <math>β</math> dependence of the strain-hardening rate was different. Our findings showed that the tuning of inclusions shape, extra strengthening, grain sizes, and volume fractions of the inclusions circumvented the strength-ductility trade-off and achieved outstanding strength-ductility synergy as demonstrated by the strength-ductility map.

Quantitative analysis of hetero-deformation induced strengthening in heterogeneous grain structure

Theoretical Insight of Strengthening and Hardening Behavior in Ultrafine-Grained Metals under High Pressure

A modified kinematic hardening model considering hetero-deformation induced hardening for bimodal structure based on crystal plasticity

A statistical model for predicting the mechanical properties of nanostructured metals with bimodal grain size distribution

Micromechanical Modeling of Work Hardening for Coupling Microstructure Evolution, Dynamic Recovery and Recrystallization: Application to High Entropy Alloys

A micromechanical model for heterogeneous nanograined metals with shape effect of inclusions and geometrically necessary dislocation pileups at the domain boundary

Atomic-scale Insights into the Effect of Layer Thickness Ratio on the Tensile Properties of Heterostructured Nano-Aluminum

The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy

Investigation of Grain Boundary and Orientation Effects in Polycrystalline Metals by a Dislocation-Based Crystal Plasticity Model

Hetero-zone boundary affected region: A primary microstructural factor controlling extra work hardening in heterostructure

Revealing Extra Strengthening and Strain Hardening in Heterogeneous Two-Phase Nanostructures

Modeling and Analysis of Yielding and Strain Hardening in Metastable High‐Entropy Alloys

Back-stress-induced Strengthening and Strain Hardening in Dual-Phase Steel

High-resolution mapping of the strain heterogeneity in heterogeneous and homogeneous structured Mg13Gd alloy

Stress/strain Gradient Plasticity Model for Size Effects in Heterogeneous Nano-Microstructures

A dislocation-based model for deformation and size effect in multi-phase steels

A Physical Model Revealing Strong Strain Hardening in Nano-Grained Metals Induced by Grain Size Gradient Structure

Effect of bimodal grain size and gradient structure on heterogeneous deformation induced (HDI) stress and mechanical properties of Cu

High-resolution Mapping of the Strain Heterogeneity in Heterogeneous and Homogeneous Structured Mg 13gd Alloy

Effects of heterogeneous plastic strain on hydrogen-induced cracking of twinning-induced plasticity steel: A quantitative approach

Tensile Behaviors and Strain Hardening Mechanisms in a High-Mn Steel with Heterogeneous Microstructure