Abstract:Nickel-rich layered oxides, as the most promising commercial cathode material for high-energy density lithium-ion batteries, experience significant surface structural instabilities that lead to severe capacity deterioration and poor thermal stability. To address these issues, radially aligned grains and surface LixNiyWzO-like heterostructures are designed and obtained with a simple tungsten modification strategy in the LiNi0.91Co0.045Mn0.045O2 cathode. The formation of radially aligned grains, manipulated by the WO3 modifier during synthesis, provides a fast Li+ diffusion channel during the charge/discharge process. Moreover, the tungsten tends to enter into the lattice of the primary particle surface, and the armor-type tungsten-rich heterostructure protects the bulk material from microcracks, structural transformations, and surface side reactions. First-principles calculations indicate that oxygen is more stable in the surface tungsten-rich heterostructure than elsewhere, thus triggering an improved surface structural stability. Consequently, the 2 wt % WO3-modified LiNi0.91Co0.045Mn0.045O2 () material shows outstanding prolonged cycling performance (capacity retention of 80.85% after 500 cycles) and excellent rate performance (5 C, 188.4 mA h g–1). In addition, its layered-to-rock salt phase transition temperature is increased by 80 °C compared with that of the pristine cathode. This work provides a novel surface modification approach and an in-depth understanding of the overall performance enhancement of nickel-rich layered cathodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12893?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12893</a>.SEM images of the raw materials; SEM images of the intermediate materials; SEM images for the lithiated cathode materials; cross-sectional images; TEM images with EDS mapping and line scans; XRD patterns for the lithiated cathode materials; Rietveld fitting results for the XRD patterns; DFT calculation models of a W atom in different substitution sites; XPS spectra and fitting results; electrochemical performance between 2.5 and 4.3 V; electrochemical performance between 2.7 and 4.5 V; full pouch-type cell cyclability; GITT curves; cyclic voltammogram curves; in situ XRD patterns during the charging process; X-ray diffraction patterns after 200 cycles; equivalent circuit of EIS fitting; schematic illustration of the fading mechanism; in situ XRD patterns during the heating experiment; DSC profiles; TG/DSC profiles; DFT calculation models in different sites; ICP-AES results; crystallographic results; XPS fitting results; cycling performance results; rate performance results; GITT results; comparison of electrochemical performance results; EIS results; and charges gain/loss results (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12893/suppl_file/am0c12893_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

One-time sintering process to modify xLi2MnO3 (-x)LiMO2 hollow architecture and studying their enhanced electrochemical performances

Surface Modification and Electrochemical Properties of Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

A novel surface modification strategy for Li-rich Mn-based layered oxide cathodes of high-capacity and high-cyclic stability by an additive of LiBH<sub>4</sub> to the electrolyte

Constructing a robust integrated surface structure for enhancing the performance of Li-rich Mn-based oxides cathodes

Suppressing Bulk Strain and Surface O2 Release in Li-Rich Cathodes by Just Tuning the Li Content

Feasibility to Improve the Stability of Lithium-Rich Layered Oxides by Surface Doping

Surface Reconstruction of High-Voltage LiNi0.5Mn1.5O4 Cathode via the Sculpture Method toward Enhanced Stability

An In Situ Near‐Surface Reconstruction Strategy Endowing Lithium‐Rich Oxides with Li/O Dual Vacancies and Spinel‐Carbon Dual Coating Layers Toward High Energy Density Cathode

Enhanced long-term cyclability in Li-Rich layered oxides by electrochemically constructing a LixTM3-xO4-type spinel shell

Surface Structure Evolution and its Impact on the Electrochemical Performances of Aqueous‐Processed High‐Voltage Spinel LiNi0.5Mn1.5O4 Cathodes in Lithium‐Ion Batteries

Regulating the Grain Orientation and Surface Structure of Primary Particles through Tungsten Modification to Comprehensively Enhance the Performance of Nickel-Rich Cathode Materials

Surface Doping to Enhance Structural Integrity and Performance of Li‐Rich Layered Oxide

Interphase Modification of Li(Ni0.5Co0.2Mn0.3)O2 Based Lithium Battery Electrode Materials by Depolarized and Pre-Lithiation for High Capacity and Cycling Performance

Unlocking The Potential of Li‐rich Mn‐based Oxides for High‐rate Rechargeable Lithium‐ion Batteries

Can surface modification be more effective to enhance the electrochemical performance of lithium rich materials?

Overlithiation-driven structural regulation of lithium nickel manganese oxide for high-performance battery cathode

Stabilizing the Structure of LiMn0.5Fe0.5PO4via the Formation of Concentration-Gradient Hollow Spheres with Fe-rich Surfaces.