Abstract:Cu-SSZ-13 and Zr-modified Cu-SSZ-13 catalysts with different Zr/Cu mass ratios were prepared by ion-exchange and impregnation methods, respectively. The NH3-SCR performance tests were performed using the catalyst performance evaluation device to investigate the effects of different Zr/Cu mass ratios on the catalyst ammonia-selective catalytic reduction (NH3-SCR) performance. X-ray diffraction, ICP-OES, BET, NH3 temperature-programed desorption (NH3-TPD), H2 temperature-programmed reduction (H2-TPR), X-ray photoelectron spectrometry, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to characterize the catalysts. The results show that the prepared Cu-SSZ-13 catalyst had good catalytic activity. Zr introduction was carried out on this basis. The results showed that proper Zr doping improved the catalytic activity at low temperatures and widened the high-temperature stage, with an optimal activity stage at a Zr/Cu mass ratio of 0.2. The NO x conversion efficiency was close to 100% at 200 °C and over 80% at 450 °C. The active species were well dispersed on the catalyst surface, and the metal modification did not change the crystal structure of the zeolite. The NH3-TPD results showed that the Zr-modified catalyst had more abundant acid sites, and the H2-TPR results indicated that the Cu species on the catalyst had excellent reducibility at low temperatures. The interaction between Cu and Zr could regulate the Cu+ and Cu2+ proportion on the catalyst surface, which facilitated the increase in the Cu+ for fast SCR reaction at low temperatures. With abundant acid sites and both SCR reactions following the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) mechanism on the catalyst surface at a low temperature of 150 °C, more abundant acid sites and reaction paths created favorable conditions for NH3-SCR reactions at low temperatures.

The Study of C3H6 Impact on Selective Catalytic Reduction by Ammonia (NH3-SCR) Performance over Cu-SAPO-34 Catalysts

NH3-SCR on Cu, Fe and Cu + Fe Exchanged Beta and SSZ-13 Catalysts: Hydrothermal Aging and Propylene Poisoning Effects

The Study on Cu-ZK-5 Catalyst of Copper Content Regulation and Anti-Propylene Poisoning Mechanism in NH3-SCR Reaction

Effect of Cu loading on the performance and kinetics of Cu/SAPO-34 catalysts for selective catalytic reduction with NH3

The study on Cu-ZK-5 catalyst of copper content regulation and anti-propylene poisoning mechanism in NH 3 -SCR reaction

Recent Nh3-Scr Mechanism Research over Cu/Sapo-34 Catalyst

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Catalytic Performance and Kinetics Study of Titania-Supported Catalysts in NH3-SCR Process

Study on the Performance of the Zr-Modified Cu-SSZ-13 Catalyst for Low-Temperature NH3-SCR

Effects of Catalyst Physicochemical Properties on the Catalytic Activity of Cu Zeolite Selective Catalytic Reduction at Different Inlet Gas Conditions

In situ DRIFTS and temperature-programmed technology study on NH 3 -SCR of NO x over Cu-SSZ-13 and Cu-SAPO-34 catalysts

In Situ Drifts Study on Non-Thermal Plasma-Assisted Nox Reduction by Propene over Ag/Al2o3 Catalyst

A comparison study on non-thermal plasma-assisted catalytic reduction of NO by C3H6 at low temperatures between Ag/USY and Ag/Al2O3 catalysts

The effect of Si environments on NH3 selective catalytic reduction performance and moisture stability of Cu-SAPO-34 catalysts

Catalytic Performances of Cu/MCM-22 Zeolites with Different Cu Loadings in NH3-SCR

Urea-related Reactions and Their Active Sites over Cu-SAPO-34: Formation of NH3 and Conversion of HNCO

Recent Understanding of Low-Temperature Copper Dynamics in Cu-Chabazite NH3-SCR Catalysts

Effect of support acidity on selective catalytic reduction of NO by C3H6 over Cu-based pillared clay catalyst

The Effect of Sulfate Species on the Activity of NH3-SCR over Cu/SAPO-34

In situ regeneration of sulfated Cu/SAPO-34 catalyst for the selective catalytic reduction of NOx with NH3

Preparation of the Coupling Co-Precipitation and Impregnation Catalyst Ag/Al₂O₃ with High Catalytic Performance in Selective Catalytic Reduction of NO with C₃H6.