Abstract:This paper presents an analysis of physical mechanisms related to operation and optimization of interdigitated back contact (IBC) poly-silicon-based devices. Concepts of carrier selectivity and tunneling are used to identify the parameters that impact on the fill factor. Then, based on technology computer-aided design (TCAD) numerical simulations, we describe the device performance in terms of transport and passivation. A validation of the model is performed by matching measured and simulated R, T, and external quantum efficiency spectra and electrical parameters. As result of such process, the opto-electrical losses of the reference device are identified. Then, we execute a study of the impact of process parameters on the performance of the IBC device under analysis. Assuming a uniform SiO2 layer, simulation results reveal that both n-type and p-type poly-Si contacts can be theoretically perfect (i.e., approx. lossless), if assuming no interface recombination but considering tunneling of both carrier types. In other words, there exists an optimum oxide thickness (1nm) for which majority carriers tunneling works already very well, and minority tunneling is still low enough to not result in significant recombination. Moreover, SiO2 thickness up to maximum 1.6 nm is crucial to achieve high efficiency. Regarding rear geometry analysis, the efficiency curve as a function of emitter width peaks at 70 of pitch coverage. Further, it is shown that diffused dopants inside crystalline silicon make the device resilient to passivation quality. Finally, the calibrated model is used to perform an optimization study aiming at calculating the performance limit. The estimated performance limit is 27.3 for a 100-m-thick bulk, 20-nm-thick poly-silicon layers, silver as rear contact, and double ARC.

TH EU PVSEC , AMSTERDAM , THE NETHERLANDS , 2014 Design , fabrication and characterisation of a 24 . 4 % ef fi cient interdigitated back contact solar cell

RESEARCH ON 400cm2 a-Si/a-Si TANDEM SOLAR CELLS

Design, realization and loss analysis of efficient low-cost large-area bifacial interdigitated-back-contact solar cells with front floating emitter

Interdigitated Back Contact Technology as Final Evolution for Industrial Crystalline Single-Junction Silicon Solar Cell

Systematic Modeling and Optimization for High‐Efficiency Interdigitated Back‐Contact Crystalline Silicon Solar Cells

Efficient Low-Cost IBC Solar Cells with a Front Floating Emitter: Structure Optimization and Passivation Layer Study

Interdigitated back contact silicon heterojunction solar cell and the effect of front surface passivation

Numerical Simulations of IBC Solar Cells Based on Poly-Si Carrier-Selective Passivating Contacts

High-efficiency black IBC c-Si solar cells with poly-Si as carrier-selective passivating contacts

Characterization of 23-percent efficient silicon solar cells

24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design

Realization and Simulation of Interdigitated Back Contact Silicon Solar Cells with Dopant-Free Asymmetric Hetero-Contacts

Tailoring Interdigitated Back Contacts for High-performance Bifacial Silicon Solar Cells

Highly Efficient and Industrially Feasible Interdigitated Back‐Contact Perovskite Solar Cells with Front Carrier Transport Layers Selected Using 2D Simulation

Ultrathin Bifacial Passivated Emitter and Rear Cell with Inverted Pyramid Textures

Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W

High-Efficiency Silicon Inverted Pyramid-Based Passivated Emitter and Rear Cells

Development of TOPCon tunnel-IBC solar cells with screen-printed fire-through contacts by laser patterning

High‐Efficiency Interdigitated Back Contact Silicon Solar Cells with Front Floating Emitter

22.13% Efficient Industrial P-Type Mono Perc Solar Cell

Efficiency Limit Analysis of 10 m Silicon Thin Film Solar Cells