Abstract:An environment friendly and cost-effective process has been developed for production of LiOH from spent LFP cathode material. By using a suspension electrolysis system comprising an electrodialysis process, the spent LFP cathode material was oxidized and released lithium ion in the anode chamber, which is similar to that in the charging of an LFP battery. More than 95% of Li was leached and the current efficiency can reach up to 85.81%. And then the resulting lithium ion was migrated through the cation-exchange membrane and generated LiOH with OH– in the cathode chamber. High purity LiOH solution could be obtained due to the impurities in anode chamber being insulated by the monovalent permselectivity cation-exchange membrane. Kinetics analysis indicates that the delithiation process on the anode electrode was divided into two stages. In the first stage, the reaction rate was limited by the electrochemistry. Thereafter, it was controlled by the diffusion in the second stage. Finally, LiOH·H2O can be directly produced after evaporative crystallization via vacuum evaporation. A green close-loop process was then proposed, in which very little solid waste or wastewater is generated. Compared with other recovery processes, the proposed process has the highest profit due to the production of LiOH·H2O which is more valuable and no chemical regents being consumed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c04960?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c04960</a>.Composition of the spent LiFePO4; Principle of electrodialysis for production of LiOH; Experimental installation for recycling of spent LFP by suspension electrodialysis; XPS patterns of the (a) spent cathode and (b) leaching residue; Properties of cation-exchange membrane; Elemental compositions of the prepared FePO4; Elemental compositions of the LiOH and LiCl solution; Elemental compositions of the prepared LiOH·H2O; Preliminary analysis of the economic (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c04960/suppl_file/sc0c04960_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Recovery of battery-grade products from mixed spent LiFePO4/LiMn2O4 cathodes via slurry electrolysis

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Recovering Fe, Mn and Li from LiMn1-xFexPO4 cathode material of spent lithium-ion battery by gradient precipitation

Hydrometallurgical recovery of lithium carbonate and iron phosphate from blended cathode materials of spent lithium-ion battery

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

Sustainable recovery of lithium from spent LiFePO4 via proton circulation

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

A facile new process for the efficient conversion of spent LiFePO4 batteries via (NH4)2S2O8-assisted mechanochemical activation coupled with water leaching

Process for recycle of spent lithium iron phosphate battery via a selective leaching-precipitation method

Sequential separation and recovery of phosphorus and lithium from lithium phosphate slag by selective extraction-precipitation

Electrolytic Separation and Reuse of Active Materials from Discarded Lithium-Ion Batteries

Selective lithium recovery and integrated preparation of high-purity lithium hydroxide products from spent lithium-ion batteries

Efficient separation and coprecipitation for simplified cathode recycling

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

Efficient recovery of electrode materials from lithium iron phosphate batteries through heat treatment, ball milling, and foam flotation

A Green and Cost-Effective Method for Production of LiOH from Spent LiFePO 4

Selective Metal Recovery: Innovating Leaching from Lfp-NMC Cathode Mixtures in Lithium-Ion Batteries

Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries

Recovery of Li2CO3 from Spent LiFePO4 by Using a Novel Impurity Elimination Process

Recovering valuable metals from the leaching liquor of blended cathode material of spent lithium-ion battery