Abstract:High consumption of acids and reductants is usually required when spent lithium-ion batteries are recycled using a hydrometallurgy route. The overstoichiometric chemicals end up as pollutants that have to be further treated. Low chemical and energy consumption have attracted considerable attention to achieve sustainability of a recycling process. In this research, LiFePO4 was used as a reductant and induced crystallization was performed for the removal of Fe and P. More importantly, we demonstrate that it is possible to achieve additional reductant-free and near-to-stoichiometric acidic recovery of spent ternary lithium-ion batteries (NCMs) by introducing FePO4·2H2O seed crystals and using waste LiFePO4. High efficiencies (>96%) of critical metals including Ni, Co, Mn, and Li are achieved, while iron phosphate remains as a solid product. Then, the leaching solution can be further used for the Ni–Co–Mn hydroxide precursor and lithium carbonate preparation. In addition, the mechanisms were subsequently investigated by combining thermodynamics analysis and systematic characterizations. This entire recycling process can be a highly economic, closed-loop alternative for recovering valuable metals from spent lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08163?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08163</a>.Detailed results of different parameters on synergistic leaching; reuse of leaching residues as seed crystals; leaching efficiencies of different types of NCM cathode wastes; SEM micrographs of the Ni–Co–Mn hydroxide precursor and leaching residues at different times (0.5–4 h); mass fraction of Li2CO3 precipitation and FePO4·2(H2O) residues; and thermodynamic data and equilibrium equations relative to the E–pH diagram of the Li–Fe–P–H2O system (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08163/suppl_file/sc0c08163_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Selective lithium recovery and integrated preparation of high-purity lithium hydroxide products from spent lithium-ion batteries

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Highly selective metal recovery from spent lithium-ion batteries through stoichiometric hydrogen ion replacement

Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries

Preferentially selective recovery of lithium from spent LiCoO2 by sulfation roasting of MnSO4

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

A promising selective recovery process of valuable metals from spent lithium ion batteries via reduction roasting and ammonia leaching

Novel approach to recycling of valuable metals from spent lithium-ion batteries using hydrometallurgy, focused on preferential extraction of lithium

Preferential Extraction of Lithium from Spent Cathodes and the Regeneration of Layered Oxides for Li/Na-Ion Batteries

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

Selective lithium extraction of cathode materials from spent lithium-ion batteries via low-valent salt assisted roasting

Preferential and efficient extraction of lithium under the combined action of reduction of herb-medicine residue and leaching of oxalic acid

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Selective lithium recovery from waste lithium-ion batteries by H 2 SO 4 roasting focused on process intensification and conversion mechanism

Selective Lithium Leaching from Spent Lithium-Ion Batteries Via a Combination of Reduction Roasting and Mechanochemical Activation

Improved recovery of lithium from spent lithium-ion batteries by reduction roasting and NaHCO3 leaching

A sustainable approach for selective recovery of lithium from cathode materials of spent lithium-ion batteries by induced phase transition

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

Magnetization roasting combined with multi-stage extraction for selective recovery of lithium from spent lithium-ion batteries

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching