Abstract:An environment friendly and cost-effective process has been developed for production of LiOH from spent LFP cathode material. By using a suspension electrolysis system comprising an electrodialysis process, the spent LFP cathode material was oxidized and released lithium ion in the anode chamber, which is similar to that in the charging of an LFP battery. More than 95% of Li was leached and the current efficiency can reach up to 85.81%. And then the resulting lithium ion was migrated through the cation-exchange membrane and generated LiOH with OH– in the cathode chamber. High purity LiOH solution could be obtained due to the impurities in anode chamber being insulated by the monovalent permselectivity cation-exchange membrane. Kinetics analysis indicates that the delithiation process on the anode electrode was divided into two stages. In the first stage, the reaction rate was limited by the electrochemistry. Thereafter, it was controlled by the diffusion in the second stage. Finally, LiOH·H2O can be directly produced after evaporative crystallization via vacuum evaporation. A green close-loop process was then proposed, in which very little solid waste or wastewater is generated. Compared with other recovery processes, the proposed process has the highest profit due to the production of LiOH·H2O which is more valuable and no chemical regents being consumed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c04960?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c04960</a>.Composition of the spent LiFePO4; Principle of electrodialysis for production of LiOH; Experimental installation for recycling of spent LFP by suspension electrodialysis; XPS patterns of the (a) spent cathode and (b) leaching residue; Properties of cation-exchange membrane; Elemental compositions of the prepared FePO4; Elemental compositions of the LiOH and LiCl solution; Elemental compositions of the prepared LiOH·H2O; Preliminary analysis of the economic (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c04960/suppl_file/sc0c04960_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

### Problems the Paper Aims to Solve The paper aims to develop an environmentally friendly and cost-effective method to recover lithium hydroxide (LiOH) from spent lithium iron phosphate (LiFePO₄, abbreviated as LFP) cathode materials. Specifically, the paper addresses the problem through the following points: 1. **Electrodialysis System**: Utilizing a suspension electrolysis system combined with an electrodialysis process to release lithium ions from the spent LFP cathode materials and generate a high-purity LiOH solution. 2. **Environmental Friendliness**: The entire process avoids the generation of chemical waste and does not require the addition of chemical reagents, thus having a minimal impact on the environment. 3. **Economic Efficiency**: Compared to traditional recycling methods, this method offers higher economic efficiency because the produced LiOH·H₂O has a higher value. Through this method, the researchers hope to address the environmental issues and resource wastage problems associated with the recycling of spent LFP battery materials, as well as improve recycling efficiency and economic returns.

A Green and Cost-Effective Method for Production of LiOH from Spent LiFePO 4

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

A method for recovering Li3PO4 from spent lithium iron phosphate cathode material through high-temperature activation

A Facile Recovery Process for Cathodes from Spent Lithium Iron Phosphate Batteries by Using Oxalic Acid

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

A mild closed-loop process for lithium–iron separation and cathode materials regeneration from spent LiFePO 4 batteries

Selective recovery of Li and FePO4 from spent LiFePO4 cathode scraps by organic acids and the properties of the regenerated LiFePO4

Sustainable recovery of lithium from spent LiFePO4 via proton circulation

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

Study on Metal Recovery Process and Kinetics of Oxidative Leaching from Spent LiFePO4 Li-batteries

A Sustainable Closed-Loop Process of Oxidation Leaching and Regeneration for Lithium Iron Phosphate Materials from Spent Batteries

Two Targets, One Strike: Efficient Recovery of Lithium and Simultaneous Removal of Impurities from Spent LFP Batteries Via Ferric Ions Assisted Air Oxidation Method

A green recyclable process for selective recovery of Li and Fe from spent lithium iron phosphate batteries by synergistic effect of deep eutectic solvent and oxygen

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Total Component Recovery of Spent LiFePO 4 Cathode Powder: A Leaching-Adsorption Process

A fast and efficient method for selective extraction of lithium from spent lithium iron phosphate battery

Recycling of metals from LiFePO4 battery cathode material by using ionic liquid based-aqueous biphasic systems

Process for recycle of spent lithium iron phosphate battery via a selective leaching-precipitation method

The priority leaching of lithium from spent LiFePO4 cathode without the oxidization

Recovery of Li2CO3 from Spent LiFePO4 by Using a Novel Impurity Elimination Process

A sustainable closed-loop method of selective oxidation leaching and regeneration for lithium iron phosphate cathode materials from spent batteries