Abstract:China Spallation Neutron Source is a high intensity proton accelerator based facility, and its accelerator complex includes two main parts an H- linac and a rapid cycling synchrotron. The RCS accumulates the 80MeV proton beam, and accelerates it to 1.6GeV, with a repetition rate of 25Hz. The dipole of the CSNS RCS is operated at a 25 Hz sinusoidal alternating current which causes severe vibrate. The vibration will influence the long term safety and reliable operation of the magnet. The dipole of the CSNS RCS is an active vibration equipment which is different from the ground vibration accelerator. It is very important to design and study the dynamic characteristics of the dipole girder system. This paper takes the dipole and girder as a specific model system, a method for studying the dynamic characteristics of the system is put forward by combining theoretical calculation with experimental testing. The modal parameters with and without vibration isolator of the dipole girder system are obtain through ANSYS simulation and testing. Then the dynamic response of the system is calculated with modal analysis and vibration testing data. The dipole girder takes four-point support system which maybe appears over constrained in the progress of adjustment. The dynamic characteristics and dynamic response of the three point girder system were studied with the same method.

The Study on the Effects of Chromaticity and Magnetic Field Tracking Errors at CSNS/RCS

Study on the magnetic measurement results of the injection system for CSNS/RCS

Tune optimization for alleviating space charge effects and suppressing beam instability at the RCS of CSNS

The effects of injection beam parameters and foil scattering for CSNS/RCS

The compensation for the edge focusing of chicane bump magnets by harmonic injection in CSNS/RCS

Design and Measurement of Dipole Magnets for CSNS 1.6GeV RCS

Electron emission of stripping foil and collimation system for CSNS/RCS

Experimental Study Using Touschek Lifetime As Machine Status Flag in SSRF

Design and performance of LLRF system for CSNS/RCS

Study on the transverse painting during the injection process for CSNS/RCS

Beam losses due to the foil scattering for CSNS/RCS

Study on the injection beam commissioning software for CSNS/RCS

Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS

Study on the injection optimization and transverse coupling for CSNS/RCS

Injection orbit matching for CSNS/RCS

Study the vibration and dynamic response of the dipole girder system for CSNS/RCS

Physical and Structural Design of Fast Extraction Kickers for CSNS/RCS

Development of a prototype bump magnet for csns \ rcs injection

Impact Of Coherent Synchrotron Radiation On Beam Qualities In A Chicane

Commissioning and operation of the transverse collimation system at the RCS of CSNS

The vibration research of the AC dipole-girder system for CSNS/RCS