Abstract:In this study, in order to obtain excellent mechanical properties in TiB2/Al–Cu–Mn–Cd composite, an optimized heat treatment, i.e., short-time solution treatment at 535 °C for 1 h following long-time solution at 523 °C for 11 h, and aging treatment, i.e., aged at 170 °C for 12 h, is proposed. In addition, this study investigated the connection between microstructure evolution and mechanical properties during heat treatment. The results show that with adoption of the optimized solution treatment, the area fraction of second and eutectic Al2Cu phases decreased from 5.08% in the as-cast state to less than 0.36% owing to improvement of dissolution efficiency in the high-temperature short-time solution. Comparing mechanical properties of the composite in the as-cast state and in the peak-aged state, average ultimate tensile strength and yield strength increased from 211.9 MPa to 523.0 MPa and from 115.8 MPa to 451.8 MPa, respectively. However, average elongation slightly decreased from 8.78% to 8.24%. Strength contribution of the peak-aged TiB2/Al–Cu–Mn–Cd composite was mainly ascribed to Cd-rich, θ′′ and θ′ precipitates. In the peak-aged state, number density and average diameter of the plate-like θ′′ and θ′ precipitates reached 4.266 × 1021 m3 and 64.30 nm, respectively, and severe lattice distortions occurred around the Cd-rich precipitates, providing the strongest precipitation strengthening. These findings indicate that the two-stage solution treatment successfully solved the problem of the eutectic phase at the triangular grain boundary being difficult to dissolve in a TiB2/Al-Cu-Mn-Cd composite, and excellent mechanical properties were acquired with the optimized aging treatment.

Microstructure and damping property of Mn-Cu damping alloy by induction brazing and different heat treating

Damping Behavior of 3d Woven Metallic Lattice Materials

Effect of Complex Alloying of the Damping Capacity of Mn – Cu Alloys in the Range of Amplitude-Independent Damping

Effect Of Ball Milling And Spark Plasma Sintering On Microstructure And Properties Of Mn-Cu Based Damping Alloy

The Role of Dendritic Morphology and Segregation in fcc-fct Transformation and Damping Capacity of Mn–Cu Based Alloys

Effects of ultrasonic cavitation on microstructure and surface properties of Mn–Cu alloy

Effect of alloying elements (Nb, Ag) on the damping performance of Cu–Al–Mn shape memory alloys

Microstructure evolution and aging hardening in a Cu-25Ni-25Mn alloy

Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy

Investigation of the structure and properties of highly damped alloys of the Cu-Mn system

Synergistic effects of a novel Cu51Hf14 inoculant and Zr element on the microstructure and properties of Cu-Al-Mn shape memory alloy

Microstructure Evolution and Mechanical Properties of TiB2/Al–Cu–Mn–Cd Composite with the Adoption of Two-Stage Solution and Aging Treatment

Effect of Ni alloying on vacancy behavior and damping capacity in martensitic ductile Cu–Al–Mn alloys

Enhanced mechanical and damping properties of Cu-Modified Al-Ni eutectic alloys: Solid-solution and precipitation hardening effects

Microstructural evolution and properties of a Cu-Fe-Mn-P alloys with high strength and high conductivity

The mechanical and functional behaviors of Mn–15 wt.%Cu alloy produced by selective laser melting

Damping Property of Supersaturated Znal27ce Alloy During Natural Aging

Effects of laser shock processing, solid solution and aging, and cryogenic treatments on microstructure and thermal fatigue performance of ZCuAl10Fe3Mn2 alloy

Microstructure evolution, mechanical properties and tribological behaviors of copper alloy aged at different temperatures

Simultaneous improvement of strength and damping capacity of Mg-Mn alloy by tailoring bimodal grain structure

Effect of Mn/Ag Ratio on Microstructure and Mechanical Properties of Heat-Resistant Al-Cu Alloys