Abstract:Achieving long-wavelength infrared (LWIR) cameras with high sensitivity and shorter exposure times faces challenges due to series reflections from high-refractive index lenses within compact optical systems. However, designing effective antireflective coatings to maximize light throughput in these systems is complicated by the limited range of transparent materials available for the LWIR. This scarcity narrows the degrees of freedom in design, complicating the optimization process for a system that aims to minimize the number of physical layers and address the inherent large refractive mismatch from high-index lenses. In this study, we use discrete-to-continuous optimization to design a subwavelength-thick antireflective multilayer coating on high-refractive index Si substrate for LWIR cameras, where the coating consists of few (e.g., five) alternating stacks of high- and low-refractive-index thin films (e.g., Ge-YF 3 , Ge-ZnS, or ZnS-YF 3 ). Discrete optimization efficiently reveals the configuration of physical layers through binary optimization supported by a machine learning model. Continuous optimization identifies the optimal thickness of each coating layer using the conventional gradient method. As a result, considering the responsivity of a LWIR camera, the discrete-to-continuous strategy finds the optimal design of a 2.3-μm-thick antireflective coating on Si substrate consisting of five physical layers based on the Ge-YF 3 high-low index pair, showing an average reflectance of 0.54 % within the wavelength range of 8–13 μm. Moreover, conventional thin-film deposition (e.g., electron-beam evaporator) techniques successfully realize the designed structure, and Fourier-transform infrared spectroscopy (FTIR) and thermography confirm the high performance of the antireflective function.

Design and fabrication of optical filters for infrared imaging temperature measurement

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

Scratch-resistant Antireflective Coating for Mid-Wave Infrared Band

Design and Fabrication of Short-Wave /Long-Wave Infrared Dichroic Beam Splitter

Influence of temperature on infrared optical system and athermal design

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Design of Infrared Hybrid Athermal Optical System

Design of Athermalization for Dual-Band Infrared Optical System Based on Harmanic Diffraction

Design of A Panoramic Long-Wave Infrared Athermal System

Decorative near-infrared transmission filters featuring high-efficiency and angular-insensitivity employing 1D photonic crystals

Patterning of Visible/Infrared Dual-Band Microstrip Filter Arrays for Multispectral Imaging Application

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Application of phase change material in tunable optical filters and shutters

High-temperature Infrared Camouflage with Efficient Thermal Management

Design and Fabrication of an Integrated Dual-Channel Thin-Film Filter for the Mid-Infrared

Ultrathin Ge-YF 3 antireflective coating with 0.5 % reflectivity on high-index substrate for long-wavelength infrared cameras

High-performance plasmonic mid-infrared bandpass filters by inverse design

Tunable mid-wave infrared Fabry-Perot bandpass filters using phase-change GeSbTe

The Anti-Reflection Coating Design for the Very-Long-Wave Infrared Si-Based Blocked Impurity Band Detectors

Advance in Optically Readable Uncooled Infrared Imaging

A four-state programmable mid-infrared band-stop filter exploiting a Ge 2 Sb 2 Te 5 film and VO 2 nanoparticles