Abstract:Incorporation of in‐situ Sn4+ doping and nano‐macro structure within TNO anode materials using facile one‐step co‐precipitation method achieves high Li+ diffusion coefficient and excellent high‐rate reversible capacities. Titanium niobium oxide (TNO) exhibits great potential as a lithium‐ion battery anode due to its high capacity, minimal volume change during cycling, and safe good operation characteristic enabled from its voltage profile. However, its intrinsically low electronic and ionic conductivity hinders its potential for practical applications. This work proposes a facile coprecipitation method to address these limitations by incorporating a nano‐macro structure and in situ Sn ion doping into bulk TNO. This approach ensures homogeneous integration of TNO precursors and the Sn dopant at a molecular level within the co‐precipitation nanoparticles. Additionally, the use of low toxicity solvents facilitate scalability of the synthesis process. Excellent rate capability, high reversible capacities, and good capacity retention are achieved simultaneously due to synergistic effects of the bulk doping, which expands the crystal volume and enhances Li+ diffusion, combined with abundant surface area of the nano‐macro structures. The specific capacity of Sn‐doped TNO nanospheres remains at 180 mAh/g at a high current density of 40 C (1 C=400 mA g−1), which is nearly four times higher than that of undoped samples. Furthermore, the cyclic voltammetry analysis at various scanning rates reveals an increased Li+ diffusion rate in Sn doped titanium niobium dioxide.

Cr3+-Doped TiNb2O7 as an advanced anode material for high-performance lithium-ion batteries

Ni0.05Ti1.95Nb10O29: an advanced anode material for high-performance lithium-ion storage

TiCr0.5Nb10.5O29/CNTs nanocomposite as an advanced anode material for high-performance Li+-ion storage

Sr-dopant Microstructure Engineering Enables High Pseudocapacitive Effects of TiNb2O7 Anode for Fast-Charging Lithium-Ion Batteries

Sr-dopant Microstructure Engineering Enables Strong Pseudocapacitive Effects of TiNb2O7 Anode for Fast-Charging Lithium-Ion Batteries

N-doped carbon-coated interconnected TiNb2O7 hollow nanospheres as advanced anodes for lithium-ion batteries

Highly effective Al-doped titanium niobate porous anode material for rechargeable high-rate Li-ion storage performance

Doping with W6+ ions enhances the performance of TiNb2O7 as an anode material for lithium-ion batteries

Diffusion tunnel shortening and Oxygen-Vacancy boosting high rate and stable lithium ion storage of crystallographic self-healed Ti2Nb10O29 anode

Establish TiNb2O7@C as Fast-Charging Anode for Lithium-Ion Batteries

Highly Oxidized State Dopant Induced Nb-O Bond Distortion of TiNb2O7 for Extremely Fast-Charging Batteries

Cr3+ and Nb5+ Co-Doped Ti2Nb10O29 Materials for High-Performance Lithium-Ion Storage

Fast, One‐Step In Situ Synthesis of a Hierarchical Sn4+‐Doped TiNb2O7 Nanosphere as a High‐Performance Anode Material

Synergy of Ion Doping and Spiral Array Architecture on Ti<sub>2</sub>Nb<sub>10</sub>O<sub>29</sub>: A New Way to Achieve High-Power Electrodes

Insight into the Li-Storage Property of Surface-Modified Ti2Nb10O29 Anode Material for High-Rate Application

Enhanced Energy Storage Performance of Zr-Doped TiNb 2 O 7 Nanospheres Prepared by the Hydrolytic Method

Facile Scalable Multi-Level Structure Engineering Makes Ti0.667Nb1.333O4 a New Promising Lithium-Ion Battery Anode

A Hierarchical Ti2Nb10O29 Composite Electrode for High-Power Lithium-Ion Batteries and Capacitors

Solvothermal Synthesis of TiNb2O7 Microspheres As Anodic Materials for High-Performance Lithium–ion Batteries

Facile synthesis of carbon and oxygen vacancy co-modified TiNb6O17 as an anode material for lithium-ion batteries

Facile fabrication of high performance TiNb2O7 anode for large-scale electrical energy storage