Abstract:TiNb2 O7 with Wadsley-Roth phase delivers double theoretical specific capacity and similar working potential in comparison to spinel Li4 Ti5 O12 , the commercial high-rate anode material, and thus can enable much higher energy density of lithium-ion batteries. However, the inter-particle resistance within the high-mass-loading TiNb2 O7 electrode would impede the capacity release for practical application, especially under fast-charging conditions. Herein, 10-20 μm-size carbon-coated TiNb2 O7 secondary particle (SP-TiNb2 O7 ) consisting of initial micro-scale TiNb2 O7 particles (MP-TiNb2 O7 ) was fabricated. The high crystallinity of active material could enable fast-charge diffusion and electrochemical reaction rate within particles, and the small number of stacking layers of SP-TiNb2 O7 could reduce the large inter-particle resistance that regular particle electrode often possess and achieve high compaction density of electrodes with high mass loading. The investigation on materials structure and electrochemical reaction kinetics verified the advances of the as-fabricated SP-TiNb2 O7 in achieving superior electrochemical performance. The SP-TiNb2 O7 exhibited high reversible capacity of 292.7 mAh g-1 in the potential range of 1-3 V (Li+ /Li) at 0.1 C, delivering high-capacity release of 94.3 %, and high capacity retention of 86 % at 0.5 C for 250 cycles in half cell configuration. Particularly, the advances of such an anode were verified in practical 5 Ah-level laminated full pouch cell. The as-assembled LiFePO4 ||TiNb2 O7 full cell exhibited a high capacity of 5.08 Ah at high charging rate of 6 C (77.9 % of that at 0.2 C of 6.52 Ah), as well as an ultralow capacity decay rate of 0.0352 % for 250 cycles at 1 C, suggesting the great potential for practical fast-charging lithium-ion batteries.

Intercalating Ti 2 Nb 14 O 39 Anode Materials for Fast-Charging, High-Capacity and Safe Lithium-Ion Batteries.

Pseudocapacitive Li+ intercalation in porous Ti2Nb10O29 nanospheres enables ultra-fast lithium storage

Defective Ti2nb10o27.1: an Advanced Anode Material for Lithium-Ion Batteries

Pseudocapacitance-Enhanced Li-Ion Microbatteries Derived by a TiN@TiO2 Nanowire Anode

Cu0.02Ti0.94Nb2.04O7: an Advanced Anode Material for Lithium-Ion Batteries of Electric Vehicles

Ti2Nb10O29–x Mesoporous Microspheres As Promising Anode Materials for High-Performance Lithium-Ion Batteries

Ni0.05Ti1.95Nb10O29: an advanced anode material for high-performance lithium-ion storage

Ru0.01ti0.99nb2o7 As An Intercalation-Type Anode Material With A Large Capacity And High Rate Performance For Lithium-Ion Batteries

Highly effective Al-doped titanium niobate porous anode material for rechargeable high-rate Li-ion storage performance

Establish TiNb2O7@C as Fast-Charging Anode for Lithium-Ion Batteries

Atomic-scale investigation on lithium storage mechanism in TiNb 2O 7

Micrometer-scale single crystalline particles of niobium titanium oxide enabling an Ah-level pouch cell with superior fast-charging capability

Cr0.5Nb24.5O62 Nanowires with High Electronic Conductivity for High-Rate and Long-Life Lithium-Ion Storage

Cr3+ and Nb5+ Co-Doped Ti2Nb10O29 Materials for High-Performance Lithium-Ion Storage

10 μm-Level TiNb2 O7 Secondary Particles for Fast-Charging Lithium-Ion Batteries

Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

Porous TiNb2O7@N-C As Anode Materials for Lithium-Ion Batteries with Ultrahigh-Rate Performance

Sr-dopant Microstructure Engineering Enables High Pseudocapacitive Effects of TiNb2O7 Anode for Fast-Charging Lithium-Ion Batteries

Porous TiNb2O7 Nanospheres As Ultra Long-life and High-power Anodes for Lithium-ion Batteries

Bulk Ti2nb10o29 As Long-Life And High-Power Li-Ion Battery Anodes

Diffusion tunnel shortening and Oxygen-Vacancy boosting high rate and stable lithium ion storage of crystallographic self-healed Ti2Nb10O29 anode