Abstract:Ti2Nb10O29, as one of the most promising anode materials for lithium-ion batteries (LIBs), possesses excellent structural stability during lithiation/delithiation cycling and higher theoretical capacity. However, Ti2Nb10O29 faces some challenges, such as insufficient ion diffusion coefficient and poor electronic conductivity. To overcome these problems, this study investigates the effect of applying nanostructure engineering on Ti2Nb10O29 and the lithium storage behaviors. We successfully synthesized hollow Ti2Nb10O29 nanospheres (h-TNO NSs) via solvothermal method using phenolic resin nanospheres as the template. The effects of using a template or not and the annealing atmospheres on the microstructures of the as-prepared Ti2Nb10O29 are investigated. Different nanostructures (porous Ti2Nb10O29 nanoaggregates (p-TNO NAs) without a template and core-shelled Ti2Nb10O29@C nanospheres (cs-TNO@C NSs)) were formed through annealing in Ar. When examined as anodes for LIBs, the h-TNO NSs electrode with hollow spherical structure displayed a better lithium storage performance. Compared to its counterparts, p-TNO NAs and cs-TNO@C NSs, h-TNO NSs electrode exhibited a higher reversible capacity of 282.5 mAh g-1 at 1C, capacity retention of 79.5% (i.e., 224.6 mAh g-1) after 200 cycles, and a higher rate capacity of 173.1 mAh g-1 at 10C after 600 cycles. The excellent electrochemical performance of h-TNO NSs is attributed to the novel structure. The hollow nanospheres with cavities and thin shells not only exposed more active sites and improved ion diffusion, but also buffered the volume variation upon cycling and facilitated electrolyte penetration. This consequently enhanced the lithium storage performance of the electrode and its high pseudocapacitive contribution (90% at 1.0 mV s-1).

Defective Ti2nb10o27.1: an Advanced Anode Material for Lithium-Ion Batteries

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Cu0.02Ti0.94Nb2.04O7: an Advanced Anode Material for Lithium-Ion Batteries of Electric Vehicles

Ti2Nb10O29–x Mesoporous Microspheres As Promising Anode Materials for High-Performance Lithium-Ion Batteries

Intercalating Ti 2 Nb 14 O 39 Anode Materials for Fast-Charging, High-Capacity and Safe Lithium-Ion Batteries.

Ru0.01ti0.99nb2o7 As An Intercalation-Type Anode Material With A Large Capacity And High Rate Performance For Lithium-Ion Batteries

Cr3+ and Nb5+ Co-Doped Ti2Nb10O29 Materials for High-Performance Lithium-Ion Storage

Ni0.05Ti1.95Nb10O29: an advanced anode material for high-performance lithium-ion storage

Atomic-scale investigation on lithium storage mechanism in TiNb 2O 7

Nano-TiNb2O7/carbon Nanotubes Composite Anode for Enhanced Lithium-Ion Storage

Orthorhombic Nb2O5-x for Durable High-Rate Anode of Li-Ion Batteries.

Porous Tinb24o62 Microspheres As High-Performance Anode Materials for Lithium-Ion Batteries of Electric Vehicles

Crystal Structure Modification Enhanced FeNb11O29 Anodes for Lithium‐Ion Batteries

TiCr0.5Nb10.5O29/CNTs nanocomposite as an advanced anode material for high-performance Li+-ion storage

Exploration of Cr0.2Fe0.8Nb11O29 As an Advanced Anode Material for Lithium-Ion Batteries of Electric Vehicles

Niobium doped lithium titanate as a high rate anode material for Li-ion batteries

Conductive Nb25O62 and Nb12O29 Anode Materials for Use in High-Performance Lithium-Ion Storage

Rational design of hollow Ti2Nb10O29 nanospheres towards High-Performance pseudocapacitive Lithium-Ion storage

Facile Scalable Multi-Level Structure Engineering Makes Ti0.667Nb1.333O4 a New Promising Lithium-Ion Battery Anode

Black Defect-Engineered TiO2 Nanocrystals Fabricated Through Square-Wave Alternating Voltage As High-Performance Anode Materials for Lithium-Ion Batteries

Hollow Tinb2o7@C Spheres With Superior Rate Capability And Excellent Cycle Performance As Anode Material For Lithium-Ion Batteries