Abstract:Fast charging is one of the key requirements for next‐generation lithium‐ion batteries, however, lithium‐ion diffusion rates of typical electrode materials are limited. Nanosizing of active electrode material is a common strategy to increase the effective lithium‐ion diffusion transport rate, but it also decreases the volumetric energy/power density and stability of the battery. In this work, nickel niobate NiNb2O6 is demonstrated for the first time as a new intrinsic high‐rate anode material for lithium‐ion batteries without the requirement of realizing nano‐architectures. The NiNb2O6 host crystal structure exhibits only a single type of channel for lithium‐ion intercalation and can be fully lithiated with a capacity of about 244 mAh g−1 at low current densities. Interestingly, a high diffusion coefficient of 10−12 cm2 s−1 at 300 K enables fast (dis)charging at high current densities resulting in high capacities of 140 and 50 mAh g−1 for 10 and 100C respectively. The minimal volume change during lithiation is the origin of the stable reversible lithiation process in NiNb2O6 and leads to 81% capacity retention after 20 000 cycles at 100C. Finally, full cell systems against LiFePO4 and Li[Ni0.8Co0.1Mn0.1]O2 (NCM811) cathodes demonstrate the promising energy storage performance of nickel niobate anodes in practical battery devices. Nickel niobate NiNb2O6 is a new intrinsic high‐rate anode material and can be fully lithiated with a capacity of about 244 mAh g−1, while a high diffusion coefficient of 10−12 cm2 s−1 enables fast (dis)charging with capacities of 140 and 50 mAh g−1, for 10 and 100 C respectively, with 81% capacity retention after 20 000 cycles at 100 C.

Niobium doped lithium titanate as a high rate anode material for Li-ion batteries

Ni0.05Ti1.95Nb10O29: an advanced anode material for high-performance lithium-ion storage

Orthorhombic Nb2O5-x for Durable High-Rate Anode of Li-Ion Batteries.

W6+-doped Nb2O5 as high-rate anode materials for lithium-ion batteries

Structure and High Rate Performance of Ni2+ Doped Li4Ti5O12 for Lithium Ion Battery

High Rate Capability of Nd-Doped Li4Ti5O12 As an Effective Anode Material for Lithium-Ion Battery

Highly effective Al-doped titanium niobate porous anode material for rechargeable high-rate Li-ion storage performance

The effect of sodium and niobium co-doping on electrochemical performance of Li4Ti5O12 as anode material for lithium-ion batteries

Nickel Niobate Anodes for High Rate Lithium‐Ion Batteries

Ti2Nb10O29–x Mesoporous Microspheres As Promising Anode Materials for High-Performance Lithium-Ion Batteries

Rational Design and Synthesis of Nickel Niobium Oxide with High‐Rate Capability and Cycling Stability in a Wide Temperature Range

High-Performance Lithium-Ion Storage of FeTiO3 with Morphology Adjustment and Niobium Doping

Atomic-scale investigation on lithium storage mechanism in TiNb 2O 7

Al-doped Nb2O5/carbon micro-particles anodes for high rate lithium-ion batteries

Synthesis and Electrochemical Performance of Defected Nano-Micro Structure Sodium/lithium Titanate Composites Materials for Lithium-Ion Batteries

Structure and Electrochemical Performance of Niobium-Substituted Spinel Lithium Titanium Oxide Synthesized by Solid-State Method

Fast, One‐Step In Situ Synthesis of a Hierarchical Sn4+‐Doped TiNb2O7 Nanosphere as a High‐Performance Anode Material

Synthesis and performance of micron-sized hexagonal W0.025Nb1.97O5 for high-rate lithium-ion batteries

Cr0.5Nb24.5O62 Nanowires with High Electronic Conductivity for High-Rate and Long-Life Lithium-Ion Storage

Cr3+ and Nb5+ Co-Doped Ti2Nb10O29 Materials for High-Performance Lithium-Ion Storage

Porosity‐Controlled TiNb2O7 Microspheres with Partial Nitridation as A Practical Negative Electrode for High‐Power Lithium‐Ion Batteries